⚠️ This is a v1 pattern from our old system

Generate a new v2 pattern with better formatting, PDF download, and email delivery!

Create New Pattern

purlJam

The knitting and crochet AI pattern pixie

Walls & Wings Beanie + Scarf (AoT‑Inspired) — Knit & Crochet Pattern

Inspired by towering walls, tactical lines, and soaring chevrons. This fan‑inspired design avoids any official insignia or logos. No affiliation with the owners of Attack on Titan. Make it your own with abstract “wing” chevrons and brick‑texture bands.

Skill Level

  • Intermediate (with accessible, clearly written options for adventurous beginners)

Sizes and Finished Measurements

  • Beanie Circumference (unstretched at brim): Child 17.5 in/44.5 cm; Adult S 19 in/48.5 cm; Adult M 20.5 in/52 cm; Adult L 22 in/56 cm (stretches to fit 18–24 in/46–61 cm heads).
  • Beanie Height (adjustable): Child 8 in/20.5 cm; Adult S 8.5 in/21.5 cm; Adult M 9 in/23 cm; Adult L 9.5 in/24 cm.
  • Scarf: approx 8 in/20 cm wide × 68–72 in/173–183 cm long (customizable).

Yarn

Worsted/Aran (Category 4) smooth wool or wool‑blend recommended for definition and bounce.

  • Beanie MC (wall grey): 130 (150, 170, 190) yd / 119 (137, 155, 174) m. CC1 (wing light): 20 yd/18 m. CC2 (deep green): 15 yd/14 m. CC3 (brick red, optional): 10 yd/9 m.
  • Scarf MC: 600–800 yd / 549–732 m. Accent CCs total: 60–90 yd / 55–82 m.
  • Typical skein reference: 100 g (3.5 oz) ≈ 200–220 yd (183–201 m). Adjust quantities if your skeins differ.

Needles and Hooks

  • Knitting Needles (circular and DPNs for crown): US 6 (4.0 mm, UK/Old 8) for rib; US 8 (5.0 mm, UK/Old 6) for body. Optional in‑between: US 7 (4.5 mm, UK/Old 7). 16 in/40 cm circular for brim/body; DPNs or 32 in/80 cm for magic loop at crown.
  • Crochet Hooks: US G‑6 (4.0 mm) and US H‑8 (5.0 mm). UK uses metric; select 4.0 mm/5.0 mm equivalents.

Notions

  • Stitch markers (1 contrast for BOR + 7–13 for crown repeats), tapestry/yarn needle, scissors, blocking tools, optional pom (faux fur or yarn).

Gauge

  • Knit: 20 sts × 28 rnds = 4 in/10 cm in stockinette on US 8 (5.0 mm, UK/Old 6) after wet blocking. Rib (US 6): ~24 sts × 30 rnds = 4 in/10 cm slightly stretched.
  • Crochet: 14 sts × 16 rows = 4 in/10 cm in HDC (US) / HTR (UK) on H‑8 (5.0 mm) after blocking.

Abbreviations

  • Knitting: k knit; p purl; k2tog knit 2 together; ssk slip, slip, knit; pm/sm place/slip marker; rep repeat; st(s) stitch(es); BOR beginning of round; wyif/wyib with yarn in front/back; sl slip.
  • Crochet US (UK): ch chain; sl st slip stitch; sc (dc) single (double) crochet; hdc (htr) half double (half treble); dc (tr) double (treble) crochet; BLO back loop only; FLO front loop only; FPdc (FPtr) front post double (treble) crochet; BPdc (BPtr) back post double (treble) crochet.

Tech Notes

  • Stranded colorwork: keep floats relaxed; float max 5 sts, tack longer floats.
  • Jogless stripes: on first st of new color, slip 1 knitwise in the following round.
  • Brick texture is simple knit/purl to mimic stone blocks; chevrons are abstract, not logo‑specific.

Knit Beanie — Walls & Wings

Cast On

Using US 6 (4.0 mm, UK/Old 8), CO: Child 88; Adult S 96; Adult M 104; Adult L 112 sts. Join in the round without twisting, pm for BOR. Multiple of 8 ensures crown symmetry.

Brim

  1. Work [k2, p2] rib for 1.75–2.25 in / 4.5–5.5 cm (taller for foldover brim).
  2. Optional tidy transition rnd on rib needles: knit 1 rnd, decreasing or increasing to nearest multiple of 8 if needed (listed CO already are).

Change Needles

Switch to US 8 (5.0 mm, UK/Old 6) for body.

Wall Band (Brick Texture, 24 rnds)

Work as continuous rounds over entire hat body:

Rpt of 8 sts: A = k6, p2; B = p2, k6. Rnds 1–4: work A around. Rnds 5–8: work B around. Rnds 9–12: work A. Rnds 13–16: work B. Rnds 17–20: work A. Rnds 21–24: work B.

Note: For smoother mortar lines, purl rounds can be tightened slightly; do not over‑tighten.

Wings Chevron Band (Optional Stranded Panel, 12–18 rnds)

Work 0–1 plain knit rnd, then begin chevron motif with CC2 (deep green) on MC background. Repeat motif around. Keep floats loose.

Chevron Motif (12 sts × 12 rnds): legend: . = MC knit, X = CC knit Row12(top) ..X......X.. Row11 ...X....X... Row10 ....X..X.... Row9 .....XX..... Row8 ....X..X.... Row7 ...X....X... Row6 ..X......X.. Row5 .X........X. Row4 ..X......X.. Row3 ...X....X... Row2 ....X..X.... Row1 .....XX..... (work Row1 up to Row12, repeat around)

For a bolder band, repeat rows 7–12 once (adds 6 rnds). For minimal look, work just rows 1–6 (6 rnds).

Body Depth

After wall + chevron bands, knit plain in MC until total body (brim to crown start) measures: Child 5.75 in/14.5 cm; Adult S 6 in/15 cm; Adult M 6.25 in/16 cm; Adult L 6.5 in/16.5 cm.

Crown Shaping

Ensure stitch count multiple of 8. Place 8–14 equidistant markers every (total sts ÷ 8) sts as decrease markers (DMs). Work as follows:

All sizes, work Rnd A then Rnd B alternating until noted, then Rnd A every round at end. Rnd A: *K to 2 sts before DM, k2tog, sm; rep from * around. Rnd B: Knit all. Continue until 64 sts remain. Then work Rnd A every rnd to 16 sts. Knit 1 rnd if needed for height. Cut yarn, thread tail through remaining sts twice, cinch, secure inside.

Finishing

  • Weave ends. Block over a plate or balloon for smooth crown. Attach pom if desired.

Crochet Beanie — Walls & Wings

Brim (Elastic Rib, sideways)

  1. With G‑6 (4.0 mm) and MC, ch 12 (gives ~2 in/5 cm brim). Row1: sc in 2nd ch from hook and each ch across (11). Turn.
  2. Row2: ch1, sc BLO across (11). Turn. Rep Row2 until brim fits head with slight tension: Child 18–19 in/46–48 cm; Adult S 20–21 in/51–53 cm; M 21–22 in/53–56 cm; L 22–23 in/56–58 cm.
  3. Slip stitch short ends together through BLO to form loop.

Body (worked from brim up)

  1. Switch to H‑8 (5.0 mm). Round1: ch1, work 1 hdc per brim ridge around (pick up ~64, 72, 80, 88 sts for Child, S, M, L), sl st to join. Adjust to multiple of 8.
  2. Rounds2–7: Brick Texture: work [hdc in next 6, sc in next 2] around; next 3 rounds [sc in next 2, hdc in next 6]; repeat to total 6 rounds of texture. Keep stitch count consistent.
  3. Optional Chevron Band (Tapestry Crochet): follow the 12‑st chevron chart in hdc, carrying MC/CC loosely inside. Replace “knit” with “hdc”; work X as CC hdc, . as MC hdc, ensuring color changes happen on last yarn‑over of previous stitch. Repeat chart around for 6–12 rounds.
  4. Work plain hdc until body depth equals: Child 5.5 in/14 cm; S 5.75 in/14.5 cm; M 6 in/15 cm; L 6.25 in/16 cm.

Crown

Evenly place 8 markers. Work dec rounds in hdc: Round A: [hdc to 2 before marker, hdc2tog, move marker] around. Round B: hdc even. Repeat A/B until ~24 sts remain, then hdc2tog around to ~12. Fasten off leaving tail; weave through loops to close and secure.

Knit Scarf — Walls Runner

Cast On

With US 8 (5.0 mm, UK/Old 6) and MC, CO 40 sts (≈8 in/20 cm). Optional selvedges: slip first st purlwise wyif every row for tidy edge.

Setup

Row1 (RS): k3, [k6, p2] × 4, k5. Row2 (WS): k5, [p2, k6] × 4, k3.

Brick Field

Work 16‑row brick repeat across width: Rows 1–4: work as setup (bricks). Rows 5–8: swap blocks: k3, [p2, k6] × 4, k5 on RS; mirror on WS. Rows 9–12: as Rows 1–4. Rows 13–16: as Rows 5–8. Repeat until scarf is 62–66 in/157–168 cm.

Chevron Endcaps (Optional)

On last 12–18 rows at each end, center the 12‑st chevron motif between edges: maintain 3‑st garter edges; keep bricks under motif in stockinette for smooth floats. Work stranded on RS and WS by carrying floats loosely; or duplicate stitch after finishing.

Bind Off

BO in pattern loosely. Wet block to final dimensions. Optional fringe in CCs, 6–8 in/15–20 cm per tassel.

Crochet Scarf — Wall Lines

Foundation

With H‑8 (5.0 mm) and MC, ch 42 (≈8 in/20 cm). Row1: hdc in 3rd ch from hook and each ch (40). Turn.

Brick Texture Rows

Rows 2–5: ch2 (does not count), hdc in next 6, sc in next 2; rep to last 6, hdc in 6. Turn. Rows 6–9: ch2, sc in next 2, hdc in next 6; rep, end sc in 2. Turn. Repeat Rows 2–9 until length 62–66 in/157–168 cm.

Chevron Panels

Center the 12‑st tapestry chevron over middle sts for final 12–18 rows, carrying floats loosely; or work duplicate stitch after blocking.

Edges

Optional: work 1 round of sc evenly around with G‑6 (4.0 mm), adding sc3tog at corners for neat frame.

Color Key and Chart Use

  • Legend for charts: “.” background/MC; “X” accent/CC.
  • To widen motifs, add 2 sts of MC between chevron legs and mirror.

Customization

  • Slouchier beanie: add 0.75–1.5 in/2–4 cm of plain rounds before crown.
  • Fitted cap: start crown 0.5 in/1.25 cm earlier.
  • Double‑thick brim: knit rib to 4–5 in/10–13 cm and fold.
  • High‑contrast look: work brick “mortar” with CC1 by purling in CC on mortar rows (beginners may prefer solid MC bricks).

Blocking & Care

  • Wool: soak lukewarm with gentle wool wash, press water out, shape, dry flat. Acrylic blends: steam‑hover lightly to avoid flattening texture.

Needle Conversion Quick Ref

  • US 6 = 4.0 mm = UK/Old 8
  • US 7 = 4.5 mm = UK/Old 7
  • US 8 = 5.0 mm = UK/Old 6

Notes on IP

Fan‑inspired pattern with generic chevrons and brick textures. Do not reproduce official insignia. This pattern is not affiliated with or endorsed by the rights holders of Attack on Titan.

Support & Community

Website: https://purljam.verde.uk • Email: team@verde.uk • Socials: #purljam

Created by purlJam with the help of magic AI dust. Shop Verde for patterns and yarn.

Disclaimer: Enjoy the fun! Accuracy of patterns cannot be guaranteed. Remember to use and share content responsibly when engaging with this AI-powered app.