Type
Crochet
Difficulty
intermediate
Category
pullover
AI Thinking Process
Planning
1. **Analysis**:
* **Request**: Top-down, circular yoke pullover, Size 8 (UK) adult focus, Sport weight yarn, 3.5mm hook, Single Crochet stitches.
* **Conflict Resolution**: The user explicitly requested "Top down, circular yoke" but provided a template for "Bottom up, flat pieces". As an expert designer, I will prioritize the User's specific construction request (Top Down) as it yields a modern, seamless garment, but I will maintain the *formatting and structural requirements* of the provided template.
* **Terminology**: UK Crochet Terms are required (User's "single crochet" = UK "double crochet" (dc)).
* **Target Size**: UK Size 8 is approximately a Small (81-86cm / 32-34" bust). The pattern will cover S-2XL to fulfill the template requirement, with math validated for the target size.
2. **Reference Classes**:
* *Pattern A*: Basic Seamless Circular Yoke (Generic construction ratios).
* *Pattern B*: The "Flax" Sweater (Knitting equivalent for sizing logic, adapted to crochet).
* *Pattern C*: Sport Weight Crochet Tee (For tension/drape analysis).
3. **Edge Cases**:
* *Failure Mode 1 (Stiffness)*: All-over Double Crochet (US SC) can be stiff.
* *Fix*: Use a larger hook (3.5mm is decent for Sport, but I will advise checking tension carefully) and ensure ease is sufficient.
* *Failure Mode 2 (Yoke buckling)*: Circular increases placed incorrectly cause rippling.
* *Fix*: Use standard geometric increase rounds (approx. every 3-4cm) rather than spiral random increases.
* *Failure Mode 3 (Tight Underarms)*: Top-down chains at underarm are often too few.
* *Fix*: Allocate ~8-10% of total bust circumference to underarm chains for mobility.
4. **Plan**:
* **Tension**: 20 sts x 24 rows = 10cm (Standard Sport weight crochet tension).
* **Construction**: Top-down in rounds. Ribbing added last (or first).
* **Math (Size S/UK 8)**: Target 90cm finished bust. 180 sts at chest.
* **Yoke**: Start neck ~50cm -> Increase to shoulder width -> Increase to bust.
Verification
[PRE-FLIGHT CHECKS]
1. **Completeness**: Included Materials, Tension, Sizes (S-2XL), Notes, Yoke, Separation, Body, Sleeves, Finishing.
2. **Consistency**: Tension is 20 sts/10cm. Size S Bust 90cm = 180 sts. Math checks out.
3. **Constraints**:
* Top-down? Yes.
* Circular Yoke? Yes.
* UK Terms? Yes (dc used for stitch).
* Size 8 included? Yes (as Size Small).
4. **Safety**:
* UK `dc` = US `sc`. This is noted clearly.
* Inline math validation included for all increases.
Pattern
# Classic Circular Yoke Pullover
**Designed by:** System Persona (Pattern Designer & Tech Editor)
**Difficulty:** Intermediate
**Construction:** Top-down, In the Round
## Description
This is a classic crochet pullover. While the traditional template suggests working flat, this version has been technically adapted to a **top-down circular yoke** construction as per your specific request. This method allows you to try on the sweater as you go to ensure a perfect fit for a UK Size 8 (and other sizes). The body uses basic Double Crochet (UK) fabric for a clean, minimalist look.
## Materials
* **Yarn:** Sport Weight Yarn (approx. 125m/50g).
* Estimates: 1000 (1100, 1250, 1400, 1550) metres.
* **Hook:** 3.5mm (or size needed to meet tension).
* **Notions:** Stitch markers, tapestry needle, measuring tape, scissors.
## Sizes & Measurements
**To Fit Bust:**
* **S (UK 8-10):** 81-86cm (32-34")
* **M (UK 12-14):** 91-96cm (36-38")
* **L (UK 16-18):** 101-106cm (40-42")
* **XL (UK 20-22):** 111-117cm (44-46")
* **2XL (UK 24-26):** 122-127cm (48-50")
**Finished Garment Bust (includes ~5-8cm positive ease):**
* **S:** 92cm
* **M:** 102cm
* **L:** 112cm
* **XL:** 122cm
* **2XL:** 132cm
## Tension (Gauge)
**Critical for fit:** 20 stitches and 24 rows = 10 x 10 cm in Double Crochet (UK) using 3.5mm hook.
*Please create a 15x15cm swatch. If you have more stitches per 10cm, switch to a larger hook. If fewer, switch to a smaller hook.*
## Abbreviations (UK Terminology)
* **ch:** chain
* **dc:** double crochet (US single crochet)
* **inc:** increase (work 2 dc in the same stitch)
* **st(s):** stitch(es)
* **sl st:** slip stitch
* **blo:** back loop only
* **RS:** right side
* **rem:** remaining
## Pattern Instructions
### 1. Neckline & Yoke
*Notes: The yoke is worked in the round. Place a marker at the beginning of the round.*
**Foundation:** Ch 96 (104, 104, 112, 112). Join with sl st to first ch, being careful not to twist.
**Rnd 1 (Set up):** Ch 1 (does not count as st here and throughout), dc in each ch around, sl st to first dc.
`[Math Check Size S: 96 sts]`
**Rnd 2 (First Increase):**
* **S:** *Dc 3, inc; rep from * around. `[96 + 24 = 120 sts]`
* **M:** *Dc 12, inc; rep from * around. `[104 + 8 = 112 sts]`
* **L:** *Dc 12, inc; rep from * around. `[104 + 8 = 112 sts]`
* **XL:** *Dc 6, inc; rep from * around. `[112 + 16 = 128 sts]`
* **2XL:** *Dc 6, inc; rep from * around. `[112 + 16 = 128 sts]`
**Rnds 3-9:** Dc in each st around.
**Rnd 10 (Second Increase):**
* **S:** *Dc 4, inc; rep from * around. `[120 + 24 = 144 sts]`
* **M:** *Dc 3, inc; rep from * around. `[112 + 28 = 140 sts]`
* **L:** *Dc 3, inc; rep from * around. `[112 + 28 = 140 sts]`
* **XL:** *Dc 3, inc; rep from * around. `[128 + 32 = 160 sts]`
* **2XL:** *Dc 3, inc; rep from * around. `[128 + 32 = 160 sts]`
**Rnds 11-19:** Dc in each st around.
**Rnd 20 (Third Increase):**
* **S:** *Dc 5, inc; rep from * around. `[144 + 24 = 168 sts]`
* **M:** *Dc 4, inc; rep from * around. `[140 + 28 = 168 sts]`
* **L:** *Dc 4, inc; rep from * around. `[140 + 28 = 168 sts]`
* **XL:** *Dc 4, inc; rep from * around. `[160 + 32 = 192 sts]`
* **2XL:** *Dc 4, inc; rep from * around. `[160 + 32 = 192 sts]`
**Rnds 21-29:** Dc in each st around.
**Rnd 30 (Fourth Increase):**
* **S:** *Dc 6, inc; rep from * around. `[168 + 24 = 192 sts]`
* **M:** *Dc 5, inc; rep from * around. `[168 + 28 = 196 sts]`
* **L:** *Dc 6, inc; rep from * around. `[168 + 24 = 192 sts]`
* **XL:** *Dc 5, inc; rep from * around. `[192 + 32 = 224 sts]`
* **2XL:** *Dc 5, inc; rep from * around. `[192 + 32 = 224 sts]`
**Rnds 31-39:** Dc in each st around.
**Rnd 40 (Fifth Increase):**
* **S:** *Dc 11, inc; rep from * around. `[192 + 16 = 208 sts]`
* **M:** *Dc 6, inc; rep from * around. `[196 + 28 = 224 sts]`
* **L:** *Dc 5, inc; rep from * around. `[192 + 32 = 224 sts]`
* **XL:** *Dc 6, inc; rep from * around. `[224 + 32 = 256 sts]`
* **2XL:** *Dc 6, inc; rep from * around. `[224 + 32 = 256 sts]`
*Note: Work straight until Yoke measures approx 19 (20, 21, 23, 24) cm from foundation edge.*
### 2. Dividing for Body and Sleeves
In this round, we separate the sleeves from the body.
**Separation Round:**
* **S:** Dc 60 (Back), skip 44 sts (Sleeve 1), ch 12 (Underarm), dc 60 (Front), skip 44 sts (Sleeve 2), ch 12 (Underarm), join.
`[Total Body S: 60 + 12 + 60 + 12 = 144 sts]` (144 sts / 20 sts * 10cm = 72cm... *Wait. Technical Edit: This is too small for S. Correction needed.*)
**[CORRECTION - Sizing Adjustment for Separation]**
*Technical Editor Note: To achieve the 92cm finished bust for Size S, we need ~184 sts total body. The previous increases yielded 208 sts total Yoke. Let's adjust the split.*
**Corrected Separation Round:**
* **S (Total Yoke 208):** Dc 62 (Back), skip 42 (Sleeve), ch 30 (Underarm), dc 62 (Front), skip 42 (Sleeve), ch 30 (Underarm), join.
`[Body Check: 62 + 30 + 62 + 30 = 184 sts. 184 / 2 = 92cm. Correct.]`
* **M (Total Yoke 224):** Dc 67 (Back), skip 45 (Sleeve), ch 35 (Underarm), dc 67 (Front), skip 45 (Sleeve), ch 35 (Underarm), join.
`[Body Check: 67 + 35 + 67 + 35 = 204 sts. 204 / 2 = 102cm. Correct.]`
* **L (Total Yoke 224):** Dc 64 (Back), skip 48 (Sleeve), ch 48 (Underarm), dc 64 (Front), skip 48 (Sleeve), ch 48 (Underarm), join.
`[Body Check: 64 + 48 + 64 + 48 = 224 sts. 224 / 2 = 112cm. Correct.]`
* **XL (Total Yoke 256):** Dc 76 (Back), skip 52 (Sleeve), ch 46 (Underarm), dc 76 (Front), skip 52 (Sleeve), ch 46 (Underarm), join.
`[Body Check: 76 + 46 + 76 + 46 = 244 sts. 244 / 2 = 122cm. Correct.]`
* **2XL (Total Yoke 256):** Dc 76 (Back), skip 52 (Sleeve), ch 56 (Underarm), dc 76 (Front), skip 52 (Sleeve), ch 56 (Underarm), join.
`[Body Check: 76 + 56 + 76 + 56 = 264 sts. 264 / 2 = 132cm. Correct.]`
### 3. Body
**Rnd 1:** Ch 1, dc in each st and each ch around. Join.
**Rnd 2 onward:** Ch 1, dc in each st around. Join.
Continue working in rounds until body measures 30cm (or desired length) from the underarm.
**Bottom Ribbing:**
1. Ch 9.
2. **Row 1:** Dc in 2nd ch from hook and next 7 chs. Sl st into next 2 sts of the body edge. Turn.
3. **Row 2:** Skip 2 sl sts, dc in blo of next 8 sts. Turn.
4. **Row 3:** Ch 1, dc in blo of next 8 sts, sl st into next 2 sts of body edge. Turn.
5. Repeat Rows 2-3 around the entire hem. Seam the first and last row together.
### 4. Sleeves
Join yarn at the center of the underarm chain.
**Rnd 1:** Ch 1, pick up and dc stitches evenly around the armhole (working into the underarm chains and the skipped yoke stitches).
* **S:** 72 sts (30 underarm + 42 skipped).
* **M:** 80 sts.
* **L:** 96 sts.
* **XL:** 98 sts.
* **2XL:** 108 sts.
**Rnds 2-5:** Dc in each st around.
**Decrease Round:** Ch 1, dc2tog, dc to last 2 sts, dc2tog. (2 sts decreased).
Repeat Decrease Round every:
* **S:** 8th round.
* **M:** 6th round.
* **L:** 5th round.
* **XL:** 5th round.
* **2XL:** 4th round.
Work until sleeve measures 43cm (or 3cm less than desired length).
Work cuff ribbing same as Body Ribbing (using Ch 9 or shorter Ch 7 for tighter cuff).
### 5. Neckline Finishing
Join yarn to foundation chain at neckline.
**Rnd 1:** Ch 1, dc in each foundation ch around.
**Rnd 2 (Optional):** Ch 1, *dc 8, dc2tog; rep from * around to tighten slightly.
Fasten off.
## Finishing
1. Weave in all ends using tapestry needle.
2. **Blocking:** This is crucial for Sport weight yarn. Soak the sweater in lukewarm water, squeeze out excess (do not wring), and lay flat to dry. Pin out to the finished measurements listed above.
Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, and instructions before beginning your project. Generated by purlJam.uk
Access your pattern anytime
Bookmark this page to access your pattern anytime