← Back to Home

purlJam

Custom Pattern

Type

Crochet

Difficulty

beginner

Category

amigurumi

🎨 Want a Custom Pattern?

Generate your own personalized crochet patterns with PurlJam AI - free and instant!

Create Your Pattern
Generated preview image for Little Bull with Flower Crown
Generated image is inspiration only. Follow the written pattern for stitch counts, measurements, and construction details.
Stitch chart guide image for Little Bull with Flower Crown
Attached stitch chart guide image. Follow the written pattern and chart instructions for placement, stitch counts, and row order.
AI Thinking Process

Planning

1. **Design Strategy**: Beginner bull plush built from simple spheres, ovals, cones, and cylinders in worsted yarn. Soft cartoon proportions, embroidered face, detachable-style flower crown of small flat flowers and leaves. Minimal shaping; assembly-focused. 2. **Construction Plan**: Work head and body as separate closed ovals/spheres, legs/arms as stuffed cylinders, horns as mini cones, ears as small flat ovals; sew together; add flower crown last. 3. **Quality Assurance**: - Stuff firmly but keep neck join stable so head does not wobble. - Keep horn and ear placement symmetric with pins before sewing. - Flower crown sized to sit on head without stretching stitches. 4. **Final Calculations**: Gauge ~5 sc = 1" (2.5 cm) with US E-4/3.5 mm. Finished toy ~7–8" (18–20 cm) tall. Head max 30 sts; body max 36 sts; horns start 4–6 sts.

Verification

[PRE-FLIGHT CHECKS] 1. **Completeness**: Materials, gauge, abbreviations, all pieces (head, body, legs, arms, horns, ears, snout, tail, flowers, leaves), assembly, face, crown β€” covered. 2. **Consistency**: Stitch counts follow standard amigurumi increases/decreases; sphere/oval/cylinder/cone math matches template logic (6β†’12β†’18β†’24β†’30 etc.). 3. **Constraints**: Beginner level, worsted, US terms, simple shapes, bull + flower crown honored. 4. **Safety**: No math conflicts; invisible dec recommended; safety eyes optional with embroidery alternative for young children. 5. **Fix before writing**: Counts locked: head 30-st equator; body 36-st; legs/arms 12-st tubes; horns cone 4β†’8; flowers 6-petal magic-ring style.

Pattern

Little Bull with Flower Crown

Beginner Amigurumi Toy β€” Simple Shapes

Finished size: About 7–8 inches (18–20 cm) tall seated
Skill level: Beginner
Yarn weight: Worsted (4)


Materials

  • Worsted weight yarn (US 4):
    • Color A (body): cream, tan, or light brown β€” approx. 80 yd (73 m)
    • Color B (spots/hooves optional): brown or black β€” approx. 20 yd (18 m)
    • Color C (horns/hooves): dark brown or gray β€” approx. 15 yd (14 m)
    • Color D (snout/inner ear): soft pink or beige β€” approx. 10 yd (9 m)
    • Flower colors: yellow, pink, white, purple β€” small scraps
    • Leaf/stem: green β€” small scrap
  • Crochet hook: US E-4 (3.5 mm) β€” or size needed for tight fabric
  • Polyester fiberfill stuffing
  • Yarn needle
  • Stitch marker
  • Optional: 8–10 mm safety eyes (or embroider eyes)
  • Black embroidery thread or yarn scrap for nostrils/mouth
  • Pins for assembly
  • Scissors

Gauge

5 sc and 5 rnds = 1 inch (2.5 cm) in continuous rounds, worked tightly.
Exact gauge is not critical; work firmly so stuffing does not show.


Abbreviations (US terms)

  • ch β€” chain
  • sc β€” single crochet
  • inc β€” increase (2 sc in same st)
  • dec β€” decrease (invisible sc2tog preferred)
  • sl st β€” slip stitch
  • st(s) β€” stitch(es)
  • rnd(s) β€” round(s)
  • MR β€” magic ring
  • FLO β€” front loop only
  • BLO β€” back loop only
  • [ ] β€” stitches at end of round
  • ( ) β€” repeat instructions as directed

Work in continuous spirals unless noted. Use a stitch marker in the first stitch of each round.


Pattern Notes

  • Work tightly for a clean amigurumi surface.
  • Stuff as you go; final closing is difficult to stuff later.
  • Invisible decrease: insert hook FLO of next 2 sts, yarn over, pull through both, yarn over, pull through 2 loops.
  • Pin all pieces before sewing.
  • For children under 3, embroider eyes instead of safety eyes.

Head (Color A)

Rnd 1: 6 sc in MR [6]
Rnd 2: inc in each st around [12] (6 inc β†’ 6 + 6 = 12 βœ“)
Rnd 3: (sc, inc) around [18] (6 inc β†’ 12 + 6 = 18 βœ“)
Rnd 4: (2 sc, inc) around [24] (6 inc β†’ 18 + 6 = 24 βœ“)
Rnd 5: (3 sc, inc) around [30] (6 inc β†’ 24 + 6 = 30 βœ“)
Rnds 6–11: sc around [30] (6 rounds even)
Insert safety eyes between Rnds 8–9, about 6 sts apart, if using.
Rnd 12: (3 sc, dec) around [24] (6 dec β†’ 30 βˆ’ 6 = 24 βœ“)
Rnd 13: (2 sc, dec) around [18] (6 dec β†’ 24 βˆ’ 6 = 18 βœ“)
Stuff head firmly.
Rnd 14: (sc, dec) around [12] (6 dec β†’ 18 βˆ’ 6 = 12 βœ“)
Rnd 15: dec around [6] (6 dec β†’ 12 βˆ’ 6 = 6 βœ“)
Fasten off, leaving a long tail. Close remaining hole by weaving tail through front loops of last 6 sts and pulling tight. Weave in end.


Snout (Color D)

Rnd 1: 6 sc in MR [6]
Rnd 2: inc in each st around [12]
Rnd 3: (sc, inc) around [18]
Rnds 4–5: sc around [18]
Fasten off, leaving a long tail for sewing. Lightly stuff. Embroider two small vertical nostrils with dark yarn before attaching.


Body (Color A)

Rnd 1: 6 sc in MR [6]
Rnd 2: inc in each st around [12]
Rnd 3: (sc, inc) around [18]
Rnd 4: (2 sc, inc) around [24]
Rnd 5: (3 sc, inc) around [30]
Rnd 6: (4 sc, inc) around [36] (6 inc β†’ 30 + 6 = 36 βœ“)
Rnds 7–14: sc around [36] (8 rounds even)
Rnd 15: (4 sc, dec) around [30] (6 dec β†’ 36 βˆ’ 6 = 30 βœ“)
Rnd 16: sc around [30]
Rnd 17: (3 sc, dec) around [24] (6 dec β†’ 30 βˆ’ 6 = 24 βœ“)
Rnd 18: sc around [24]
Stuff body firmly, shaping a soft oval.
Rnd 19: (2 sc, dec) around [18]
Rnd 20: (sc, dec) around [12]
Rnd 21: dec around [6]
Fasten off and close hole as for head. Leave a long tail if you prefer to use it to join head; otherwise weave in and sew head with a new length of yarn.


Legs (make 4 β€” Color A, optional Color C hooves)

If using hoof color: start with Color C.
Rnd 1: 6 sc in MR [6]
Rnd 2: inc in each st around [12]
Rnd 3: sc around in BLO [12]
Switch to Color A (if using hooves).
Rnds 4–8: sc around [12] (5 rounds)
Stuff firmly.
Rnd 9: (sc, dec) around [8]
Fasten off, leaving a long tail. Flatten opening slightly and sew closed or sew directly to body with opening against body.
(Make all four the same for a simple standing/sitting bull.)


Arms (make 2 β€” optional, for a cuddly seated look; Color A)

Rnd 1: 6 sc in MR [6]
Rnd 2: inc in each st around [12]
Rnds 3–7: sc around [12]
Lightly stuff.
Rnd 8: (sc, dec) around [8]
Fasten off, leaving a long tail for sewing. Do not overstuff so arms stay soft against the body.


Horns (make 2 β€” Color C)

Rnd 1: 4 sc in MR [4]
Rnd 2: (sc, inc) around [6] (2 inc β†’ 4 + 2 = 6 βœ“)
Rnd 3: sc around [6]
Rnd 4: (2 sc, inc) around [8] (2 inc β†’ 6 + 2 = 8 βœ“)
Rnds 5–6: sc around [8]
Fasten off, leaving a long tail. Lightly stuff tip only (or leave unstuffed for softer horns). Shape into a gentle curve with your fingers when sewing.


Ears (make 2 β€” Color A; optional Color D inner)

Outer ear (Color A):
Rnd 1: 6 sc in MR [6]
Rnd 2: (sc, inc) around [9]
Rnd 3: sc around [9]
Rnd 4: (sc, dec) around [6]
Flatten and fasten off, leaving a long tail. Do not stuff.
(Optional: crochet a second smaller oval in Color D and sew to center of ear before attaching to head.)


Tail (Color A + Color C tip)

With Color A:
Ch 8.
Sl st in 2nd ch from hook and in each ch across [7 sl st].
Fasten off, leaving tail for sewing.
With Color C, cut 3 short strands (~3 inches / 7.5 cm). Fold in half and pull loop through tip of tail; pull ends through loop (lark’s head) and trim for a small tassel.


Flower Crown Pieces

Small Flower (make 5–6 in mixed colors)

Rnd 1: 5 sc in MR, join with sl st to first sc [5]
Petals: *(ch 2, 2 dc in same st, ch 2, sl st in same st), sl st in next st; repeat from * in each of the 5 sts β€” 5 petals.
Fasten off, leave tail for sewing. Pull MR tight.
Optional center: French knot or small scrap of yellow sewn in middle.

Leaf (make 4–5 β€” green)

Ch 5.
Sc in 2nd ch from hook, hdc in next, dc in next, (hdc, sc, ch 1, sc, hdc) in last ch; turn to work other side of chain: dc in next, hdc in next, sc in last. Sl st to first sc.
Fasten off, leave tail.


Assembly

  1. Snout: Pin snout centered on lower face (over Rnds 10–13 of head). Sew with Color D tail. Embroider a small curved smile below nostrils if desired.
  2. Eyes: If not using safety eyes, embroider simple oval or French-knot eyes above snout, ~6 sts apart. Add a tiny white highlight stitch for shine.
  3. Ears: Flatten ears. Sew one on each side of head at approx. Rnds 5–7, angled slightly forward.
  4. Horns: Sew horns on top of head between ears, slightly toward the front third of the crown, about 4–5 sts apart. Curve tips outward or upward.
  5. Head to body: Pin head on top of body (closed ends together). Sew securely all around with strong yarn, adding a tiny bit of extra stuffing in the neck join if needed for a full shape.
  6. Legs: For a seated bull, sew two legs to lower front of body and two to lower back/bottom so the toy sits stably. For standing, sew all four under the body in a rectangle.
  7. Arms (optional): Sew to upper sides of body just below head join.
  8. Tail: Sew to lower back center.
  9. Optional spots: With Color B, embroider or surface-crochet 2–4 irregular oval spots on body and one small spot on head.
  10. Flower crown:
    • Arrange flowers in a gentle arc or full ring that fits around the base of the horns and across the forehead.
    • Sew flowers to each other through back loops or with a running stitch of green yarn to form a chain/crown.
    • Tuck leaves under and between flowers; sew in place.
    • Tack crown to head in 3–4 places (behind horns and at sides) so it stays put but still looks perched. Do not pull stitches tight enough to pucker the head.

Finishing

  • Weave in all ends securely on the inside or under pieces.
  • Roll the toy gently between your hands to even the stuffing.
  • Steam is not usually needed; reshape horns and ears with fingers.
  • Check that all small parts (horns, flowers) are firmly attached for the intended user.

Customization Ideas (beginner-safe)

  • No arms: Omit arms for a classic four-legged sitting bull.
  • Keychain size: Stop head/body increases at 18–24 sts and shorten even rounds; use DK yarn and 2.75–3.0 mm hook.
  • Bull colors: Full brown body, white face blaze (embroider or small appliquΓ©), black hooves.
  • Crown only: Make extra flowers and wear the crown on other toys.

Quick Stitch-Count Reference

Piece Max sts Key shaping
Head 30 Inc to 30, 6 even, dec to close
Body 36 Inc to 36, 8 even, dec to close
Leg 12 Tube, optional BLO hoof ridge
Arm 12 Short tube
Horn 8 Cone 4β†’6β†’8
Snout 18 Short rounded oval
Flower 5 sc + petals Flat, 5 petals

You’re done! Your little bull is ready for display or gentle play, crowned with flowers. Happy stitching!

Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk

Access your pattern anytime

Bookmark this page to access your pattern anytime

Generate Another