← Back to Home

purlJam

Custom Pattern

Type

Crochet

Difficulty

intermediate

Category

pullover

🎨 Want a Custom Pattern?

Generate your own personalized crochet patterns with PurlJam AI - free and instant!

Create Your Pattern
AI Thinking Process

Planning

1. **Design Strategy**: - Creating a striped toddler jumper (pullover) for intermediate crocheters - Using worsted weight yarn with colorwork stripes as the featured design element - Toddler sizing requires adjustment from adult template - will provide sizes 2T, 3T, 4T, 5T, 6T - Stripe pattern should be simple and adjustable (even-row stripes for clean color changes) - Body construction: flat pieces (back, front, sleeves) worked bottom-up with ribbed edging 2. **Construction Plan**: - Bottom-up construction with ribbed hem (2" single crochet BLO ribbing) - Main body in double crochet with stripe sequence - Simple armhole shaping (skip stitches method for toddler ease) - Minimal shoulder shaping (appropriate for toddler proportions) - Crew neckline with modest front neck shaping - Tapered sleeves with ribbed cuffs - Seamed construction (shoulders, sides, sleeves, underarms) - Neckband worked in rounds for clean finish 3. **Quality Assurance**: - Toddler measurements: chest circumferences 2T(21"), 3T(22"), 4T(23"), 5T(24"), 6T(25") with 2-3" positive ease - Verify stitch counts divisible by pattern repeats where needed - Ensure stripe pattern changes align with row counts - Check that armhole depth is appropriate for toddler proportions (4-5") - Validate sleeve cap height matches armhole depth - Include clear instructions for color changes - Address yarn management for stripes (carrying vs cutting) 4. **Final Calculations**: - Gauge: 16 sts × 9 rows = 4" in double crochet (standard worsted weight) - Size 2T: 23" finished chest (21" + 2" ease) = 92 sts; 3T: 24" = 96 sts; 4T: 26" = 104 sts; 5T: 27" = 108 sts; 6T: 28" = 112 sts - Body length from underarm: 2T(9"), 3T(10"), 4T(11"), 5T(12"), 6T(13") - Armhole depth: 2T(4.5"), 3T(5"), 4T(5.5"), 5T(5.75"), 6T(6") - Sleeve length: 2T(9"), 3T(10"), 4T(11"), 5T(12"), 6T(13") from underarm to cuff

Verification

[PRE-FLIGHT CHECKS] 1. **Completeness**: ✓ Materials list with yarn amounts for all sizes ✓ Gauge swatch section ✓ Size chart with measurements ✓ Back panel instructions ✓ Front panel instructions with neck shaping ✓ Sleeve instructions with increases ✓ Finishing/assembly instructions ✓ Stripe pattern clearly defined 2. **Consistency**: ✓ Gauge: 16 sts = 4", 9 rows = 4" ✓ Size 2T: 46 sts (back) = 11.5" × 2 = 23" chest ✓ ✓ Size 3T: 48 sts (back) = 12" × 2 = 24" chest ✓ ✓ Size 4T: 52 sts (back) = 13" × 2 = 26" chest ✓ ✓ Size 5T: 54 sts (back) = 13.5" × 2 = 27" chest ✓ ✓ Size 6T: 56 sts (back) = 14" × 2 = 28" chest ✓ ✓ All stitch counts verified against gauge 3. **Constraints**: ✓ Toddler-appropriate sizing (not adult sizes) ✓ Striped colorwork feature included ✓ Intermediate difficulty level maintained ✓ Worsted weight yarn specified ✓ US terminology and measurements ✓ Pullover construction (not cardigan) 4. **Safety**: ✓ All increases calculated for gradual sleeve shaping ✓ Armhole shaping proportional to body ✓ Neck opening sufficient for toddler head ✓ Row counts align with stripe changes ✓ Even stitch counts for symmetry

Pattern

<pattern>

# STRIPED TODDLER JUMPER

**Skill Level**: Intermediate

## DESCRIPTION
A cheerful striped pullover designed for active toddlers! This classic crew neck jumper features bold stripes, comfortable ribbed edging, and easy-care construction. Worked flat in pieces from the bottom up, this pattern uses basic double crochet fabric to create a timeless wardrobe staple. The simple stripe sequence can be customized with your favorite color combinations.

---

## SIZES
2T (3T, 4T, 5T, 6T)

**Finished Chest Circumference**: 23 (24, 26, 27, 28)" / 58.5 (61, 66, 68.5, 71) cm  
**Finished Length**: 13.5 (14.5, 16.5, 17.75, 19)" / 34.5 (37, 42, 45, 48.5) cm  
**Sleeve Length from Underarm**: 9 (10, 11, 12, 13)" / 23 (25.5, 28, 30.5, 33) cm

*Designed with 2-3" (5-7.5 cm) positive ease. Choose size based on child's chest measurement.*

**Sample shown in size 3T.**

---

## MATERIALS

**Yarn**: Worsted weight (#4 Medium) yarn  
- **Main Color (MC)**: 300 (350, 425, 500, 575) yards / 275 (320, 390, 460, 525) meters
- **Contrast Color (CC)**: 200 (250, 300, 350, 400) yards / 185 (230, 275, 320, 365) meters

*Sample uses Red Heart Super Saver (100% acrylic; 364 yards / 333 meters per 7 oz / 198 g skein) in MC: Soft Navy, CC: White.*

**Hook**: US H/8 (5.0 mm) or size needed to obtain gauge  
**Notions**: 
- Yarn needle for seaming
- Stitch markers
- Measuring tape
- Scissors

---

## GAUGE
**16 stitches × 9 rows = 4" (10 cm)** in double crochet

**GAUGE IS CRITICAL**: Take time to make a gauge swatch. If you have more stitches per 4", use a larger hook. If you have fewer stitches, use a smaller hook.

### Gauge Swatch
Ch 21.  
Row 1: Dc in 4th ch from hook and in each ch across—19 dc (including beginning ch-3).  
Row 2: Ch 3 (counts as dc), turn, dc in each st across—19 dc.  
Repeat Row 2 until piece measures 5" from beginning.  
Fasten off. Measure the center 4" × 4" area.

---

## PATTERN NOTES

- **Construction**: This jumper is worked flat in pieces (back, front, and two sleeves), then seamed together.
- **Turning chain**: Ch-3 at beginning of row counts as first dc throughout.
- **Stitch count**: Numbers in parentheses refer to stitch counts including the turning chain.
- **Stripe Pattern**: Change colors at the beginning of a row. Carry yarn loosely up the side, or cut and weave in ends for cleaner edges.
- **Color changes**: To change color, work last stitch of row in old color until last yarn over, complete stitch with new color.
- **Ribbing**: Worked in single crochet through back loops only (BLO) for stretch.

---

## STRIPE SEQUENCE

Work in the following stripe pattern throughout body and sleeves:
- **4 rows MC**
- **4 rows CC**
- **4 rows MC**
- **4 rows CC**

Repeat this 16-row sequence throughout. Begin all pieces with MC.

---

## ABBREVIATIONS
- **ch** = chain
- **dc** = double crochet
- **sc** = single crochet
- **st(s)** = stitch(es)
- **sl st** = slip stitch
- **BLO** = back loop only
- **RS** = right side
- **WS** = wrong side
- **dec** = decrease (dc2tog: [yo, insert hook in next st, yo, pull through, yo, pull through 2 loops] twice, yo, pull through all 3 loops)

---

## INSTRUCTIONS

### BACK

**Ribbing**  
With MC, ch 10.

Row 1 (RS): Sc in 2nd ch from hook and in each ch across—9 sc.  
Row 2: Ch 1, turn, sc BLO in each st across—9 sc.  
Repeat Row 2 until ribbing measures 11.5 (12, 13, 13.5, 14)" / 29 (30.5, 33, 34.5, 35.5) cm slightly stretched.

*Verification: 11.5" × 4 sts/inch = 46 sts ✓*

**Join Ribbing**  
Turn ribbing sideways. Working along long edge, ch 3 (counts as first dc), work 45 (47, 51, 53, 55) dc evenly spaced across—46 (48, 52, 54, 56) dc.

*Stitch count check: 46 sts ÷ 4 = 11.5", × 2 = 23" chest for 2T ✓*

**Body**  
Continue in double crochet and stripe pattern:

Row 1 (WS): Ch 3, turn, dc in each st across—46 (48, 52, 54, 56) dc.  
Row 2: Ch 3, turn, dc in each st across—46 (48, 52, 54, 56) dc.

Repeat Row 2 until piece measures 9 (10, 11, 12, 13)" / 23 (25.5, 28, 30.5, 33) cm from ribbing, ending after completing a full stripe repeat if possible.

**Armhole Shaping**  
Next Row: Sl st in first 4 (4, 5, 5, 6) sts, ch 3, dc in each st across to last 3 (3, 4, 4, 5) sts, leave remaining sts unworked, turn—40 (42, 44, 46, 46) dc.

*Armhole sts removed: 6 (6, 8, 8, 10) total ✓*

Next Row: Ch 3, turn, dc in each st across—40 (42, 44, 46, 46) dc.

Repeat last row until armhole measures 4.5 (5, 5.5, 5.75, 6)" / 11.5 (12.5, 14, 14.5, 15) cm.

**Shoulder and Neck Shaping**  
First Shoulder:  
Next Row: Ch 3, turn, dc in next 10 (11, 11, 12, 12) sts, leave remaining sts unworked, turn—11 (12, 12, 13, 13) dc.  
Next Row: Ch 3, turn, dc in each st across—11 (12, 12, 13, 13) dc.  
Fasten off.

Second Shoulder:  
Skip center 18 (18, 20, 20, 20) sts for back neck.  
With RS facing, join yarn in next st.  
Next Row: Ch 3, dc in each of next 10 (11, 11, 12, 12) sts—11 (12, 12, 13, 13) dc.  
Next Row: Ch 3, turn, dc in each st across—11 (12, 12, 13, 13) dc.  
Fasten off.

*Back neck width: 18 sts ÷ 4 = 4.5", 20 sts ÷ 4 = 5" ✓*

---

### FRONT

Work same as Back through armhole shaping until armhole measures 2.5 (3, 3.5, 3.75, 4)" / 6.5 (7.5, 9, 9.5, 10) cm, ending with a WS row—40 (42, 44, 46, 46) dc.

**Neck Shaping**  
First Side:  
Next Row (RS): Ch 3, turn, dc in next 14 (15, 15, 16, 16) sts, leave remaining sts unworked, turn—15 (16, 16, 17, 17) dc.

Next Row: Ch 3, turn, skip next st (neck edge decrease), dc in each st across—14 (15, 15, 16, 16) dc.

Next Row: Ch 3, turn, dc in each st across to last 2 sts, skip next st, dc in top of turning ch—13 (14, 14, 15, 15) dc.

Next Row: Ch 3, turn, skip next st, dc in each st across—12 (13, 13, 14, 14) dc.

Next Row: Ch 3, turn, dc in each st across to last 2 sts, skip next st, dc in top of turning ch—11 (12, 12, 13, 13) dc.

*Shoulder matches back: 11 (12, 12, 13, 13) dc ✓*

Continue even in dc until armhole measures same as Back to shoulder. Fasten off.

Second Side:  
With RS facing, skip center 10 (10, 12, 12, 12) sts for front neck. Join yarn in next st.

Next Row: Ch 3, dc in each st across—15 (16, 16, 17, 17) dc.

Next Row: Ch 3, turn, dc in each st across to last 2 sts, skip next st, dc in top of turning ch—14 (15, 15, 16, 16) dc.

Next Row: Ch 3, turn, skip next st, dc in each st across—13 (14, 14, 15, 15) dc.

Next Row: Ch 3, turn, dc in each st across to last 2 sts, skip next st, dc in top of turning ch—12 (13, 13, 14, 14) dc.

Next Row: Ch 3, turn, skip next st, dc in each st across—11 (12, 12, 13, 13) dc.

Continue even in dc until armhole measures same as Back to shoulder. Fasten off.

---

### SLEEVES (make 2)

**Cuff Ribbing**  
With MC, ch 10.

Row 1 (RS): Sc in 2nd ch from hook and in each ch across—9 sc.  
Row 2: Ch 1, turn, sc BLO in each st across—9 sc.  
Repeat Row 2 until ribbing measures 7 (7.5, 8, 8.5, 9)" / 18 (19, 20.5, 21.5, 23) cm slightly stretched.

**Join Ribbing**  
Turn ribbing sideways. Working along long edge, ch 3 (counts as first dc), work 27 (29, 31, 33, 35) dc evenly spaced across—28 (30, 32, 34, 36) dc.

*Cuff width: 28 sts ÷ 4 = 7", 36 sts ÷ 4 = 9" ✓*

**Sleeve Body**  
Continue in double

Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, and instructions before beginning your project. Generated by purlJam.uk

Access your pattern anytime

Bookmark this page to access your pattern anytime

Generate Another