Type
Crochet
Difficulty
beginner
Category
amigurumi
AI Thinking Process
Planning
Verification
Pattern
Grinch-Inspired Holiday Grouch
Beginner Amigurumi Toy (Simple Shapes)
A sitting green grouch with a floppy Santa hat, pointy ears, and a scheming grin. Worked from basic spheres, cylinders, and a coneβno complex animal assembly. Perfect as a shelf toy, tree-sitter, or stocking stuffer.
Skill level: Beginner
Skills used: Magic ring, single crochet, increase, decrease, simple color change, sewing pieces, basic embroidery
Finished size
Approximately 6 inches (15 cm) tall seated, including the floppy hat, in worsted weight yarn at the stated gauge.
Head diameter: about 2 inches (5 cm).
Size will change if you use a different hook, yarn, or stuffing amount.
Materials
Yarn β worsted weight (category 4), acrylic or acrylic blend
- Color A (Grinch green): 50 yd / 46 m
- Color B (Santa red): 30 yd / 27 m
- Color C (white): 15 yd / 14 m
- Color D (yellow): 5 yd / 5 m
- Color E (black): 3 yd / 3 m (embroidery)
Hook: US E-4 (3.5 mm), or one to two sizes smaller than the yarn label so the fabric is tight and stuffing does not show.
Notions
- Polyester fiberfill stuffing
- Yarn needle
- Stitch marker
- Scissors
- Straight pins (for placement)
- Optional: two 6 mm or 8 mm black safety eyes (use embroidery instead if the toy is for a child under 3)
Gauge
5 sc and 5 rounds = 1 inch (2.5 cm) in single crochet, worked in the round.
Gauge is not critical for fit, but a tight fabric is essential. If you see stuffing through the stitches, go down a hook size.
Abbreviations (US terms)
- ch β chain
- st(s) β stitch(es)
- sc β single crochet
- inc β increase (2 sc in the same stitch)
- dec β invisible decrease (single crochet 2 stitches together)
- hdc β half double crochet
- dc β double crochet
- tr β treble crochet
- MR β magic ring
- sl st β slip stitch
- FO β fasten off
- rnd(s) β round(s)
Pattern notes
- Use US crochet terms throughout.
- Pieces are worked in continuous rounds (a spiral) unless stated otherwise. Do not join at the end of a round. Mark the first stitch of every round and move the marker up as you go.
- Work tightly. Amigurumi should feel firm, not drapey.
- Invisible decrease: insert hook through the front loop only of the next stitch, then through the front loop only of the following stitch, yarn over, pull through both front loops, yarn over, pull through 2 loops. This keeps the surface smooth.
- Magic ring alternative (beginner-friendly): ch 2, work the round-1 stitches into the 2nd ch from the hook, then pull the starting tail to close the hole.
- Stuff as instructed. It is hard to add stuffing after a piece is closed.
- Leave long yarn tails on pieces that will be sewn (8β12 inches / 20β30 cm).
- Color changes: finish the last yarn-over of the last stitch of the old color with the new color.
Safety: If this toy will be given to a child under 3 years, embroider the eyes and do not use safety eyes, buttons, or glued-on parts.
Special stitches
inc: 2 sc in the indicated stitch.
dec: invisible sc2tog (see notes).
Pattern instructions
Head
(Color A β green. Worked in a spiral.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnd 3: (sc, inc) around. [18] (6 increases β 12 + 6 = 18 β)
Rnd 4: (2 sc, inc) around. [24] (6 increases β 18 + 6 = 24 β)
Rnd 5: (3 sc, inc) around. [30] (6 increases β 24 + 6 = 30 β)
Rnds 6β11: sc in each st around. [30] (6 rounds)
Rnd 12: (3 sc, dec) around. [24] (6 decreases β 30 β 6 = 24 β)
Rnd 13: (2 sc, dec) around. [18] (6 decreases β 24 β 6 = 18 β)
Stuff the head firmly, shaping it into a round ball. Add more stuffing as you close.
Rnd 14: (sc, dec) around. [12] (6 decreases β 18 β 6 = 12 β)
Rnd 15: dec around. [6] (6 decreases β 12 β 6 = 6 β)
FO, leaving a 8 inch (20 cm) tail. Thread the tail through the front loops of the remaining 6 stitches, pull tight to close the hole, and weave in the end. Set aside.
Body
(Color A β green.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnd 3: (sc, inc) around. [18] (6 increases β 12 + 6 = 18 β)
Rnd 4: (2 sc, inc) around. [24] (6 increases β 18 + 6 = 24 β)
Rnds 5β10: sc in each st around. [24] (6 rounds)
Rnd 11: (2 sc, dec) around. [18] (6 decreases β 24 β 6 = 18 β)
Stuff the body firmly.
Rnd 12: (sc, dec) around. [12] (6 decreases β 18 β 6 = 12 β)
Rnd 13: dec around. [6] (6 decreases β 12 β 6 = 6 β)
FO, leaving a 12 inch (30 cm) tail for sewing the body to the head. Close the remaining hole the same way as the head, but keep the long tail free for assembly.
Arms (make 2)
(Color A β green.)
Rnd 1: 6 sc in MR. [6]
Rnds 2β7: sc in each st around. [6] (6 rounds)
Lightly stuff the lower half only (the βhandβ end). Do not overstuffβarms should stay skinny.
FO, leaving a 8 inch (20 cm) tail. Do not close the open end; it will be sewn flat to the body.
Legs (make 2)
(Color A β green. Short stubs so the grouch sits.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: (sc, inc) around. [9] (3 increases β 6 + 3 = 9 β)
Rnds 3β5: sc in each st around. [9] (3 rounds)
Stuff firmly.
FO, leaving a 8 inch (20 cm) tail. Leave the top open to sew to the body.
Ears (make 2)
(Color A β green. Worked in a short row to make a point.)
Ch 5.
Row 1: sc in 2nd ch from hook, hdc in next ch, dc in next ch, tr in last ch. [4 sts]
FO, leaving a 8 inch (20 cm) tail. The treble end is the point of the ear.
Nose
(Color A β green. A tiny bump.)
Rnd 1: 6 sc in MR. [6]
Sl st in first sc to join.
FO, leaving a 8 inch (20 cm) tail. Do not stuff. The circle cups into a small snout when sewn down.
Santa hat
(Start with Color B β red. Worked in a spiral. Do not stuff the hat except for a pinch of filling in the tip.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: sc in each st around. [6]
Rnd 3: (sc, inc) around. [9] (3 increases β 6 + 3 = 9 β)
Rnd 4: sc in each st around. [9]
Rnd 5: (2 sc, inc) around. [12] (3 increases β 9 + 3 = 12 β)
Rnd 6: sc in each st around. [12]
Rnd 7: (3 sc, inc) around. [15] (3 increases β 12 + 3 = 15 β)
Rnd 8: sc in each st around. [15]
Rnd 9: (4 sc, inc) around. [18] (3 increases β 15 + 3 = 18 β)
Rnd 10: sc in each st around. [18]
Rnd 11: (5 sc, inc) around. [21] (3 increases β 18 + 3 = 21 β)
Rnd 12: sc in each st around. [21]
Rnd 13: (6 sc, inc) around. [24] (3 increases β 21 + 3 = 24 β)
Rnd 14: sc in each st around. [24]
Rnd 15: (7 sc, inc) around. [27] (3 increases β 24 + 3 = 27 β)
Rnd 16: sc in each st around. [27]
Change to Color C (white) in the last stitch of Rnd 16.
Rnd 17: (8 sc, inc) around. [30] (3 increases β 27 + 3 = 30 β)
Rnds 18β20: sc in each st around. [30] (3 rounds)
FO, leaving a 14 inch (35 cm) tail for sewing the hat to the head.
Push a pea-sized amount of stuffing into the tip only (Rnds 1β4). Leave the rest of the hat empty so it flops to one side.
Hat pom-pom
(Color C β white.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnds 3β4: sc in each st around. [12] (2 rounds)
Rnd 5: dec around. [6] (6 decreases β 12 β 6 = 6 β)
Stuff lightly. FO, leaving a 8 inch (20 cm) tail. Close the hole as for the head.
Eyes (make 2)
(Color D β yellow.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
FO, leaving a 8 inch (20 cm) tail. Do not stuff; keep the circles flat.
Assembly
Use the matching yarn tails and a yarn needle. Pin every piece first, then sew. Whipstitch through both loops unless noted.
1. Face on the head
The headβs closed hole is the top. The start-of-round line can sit at the back.
- Eyes: Sew the two yellow circles to the front of the head, centered, covering about Rnds 7β10. Leave a gap of 3 stitches between the inner edges (about β inch / 1.5 cm). The circles may touch the midline slightlyβGrinch eyes sit close together.
- Pupils (Color E): With black yarn, satin-stitch a small oval or work a 3-wrap French knot near the inner lower third of each yellow circle (offset pupils give a sly look). If using safety eyes, insert 6β8 mm eyes through the yellow circles and the head before the head is fully closed, then sew the yellow circles down around them.
- Nose: Sew the 6-st green circle to the center front, just below the eyes, covering about Rnds 10β11. Catch only the outer edge so it stays a little puffy.
- Brows (Color E): Embroider two short, heavy dashes (or one joined unibrow) above the eyes, angled down toward the noseβabout 2β3 stitches long each. The inner ends sit lower than the outer ends.
- Smile (Color E): Embroider a wide, shallow curve under the nose, spanning about 8β10 stitches. Lift one corner slightly higher than the other for a smirk. Use backstitch or split stitch, 2 strands if your worsted splits, or a single strand of black.
2. Ears
Sew one ear to each side of the head, points up, centered on about Rnds 8β10, so they will peek out from under the hat brim. The chain edge is the base; sew that edge firmly to the head.
3. Hat
Tilt the hat so the stuffed tip falls to one side (the grouchβs left is traditional). Place the white brim around the upper head, covering roughly Rnds 1β6, with the brim sitting just above the eyes and over the ear bases. Whipstitch the last round of the brim to the head all the way around. The 30-st brim matches the 30-st head, so it should sit without gathering. (30 brim sts on 30 head sts β)
4. Pom-pom
Sew the white pom-pom to the very tip of the hat (Rnd 1). A few stitches through the hat tip are enough.
5. Head to body
The bodyβs closed hole is the bottom. Sew the top of the body (the stuffed, closed end opposite the long tailβs hole, or simply the upper curve) to the underside of the head, slightly toward the back so the face looks down a little. Use the long green tail. Sew a full circle, adding a pinch of extra stuffing in the neck gap before you close if needed so the head does not wobble.
6. Arms
Flatten the open end of each arm. Sew one arm to each side of the body, just below the head, at about Rnds 5β6 of the body. Angle them slightly forward.
7. Legs
Sew the open end of each leg to the lower front of the body, about Rnds 10β12, spaced 4β5 stitches apart, so the grouch sits with feet forward. The legs are short on purposeβthis is a sitting toy.
Weave in every remaining tail.
Finishing
- Steam is not recommended (acrylic can shine or collapse). Shape with your fingers.
- Bend the hat so it flops; a hidden stitch from the hatβs mid-section to the side of the head will hold the slouch if you want it permanent.
- Check that no stuffing shows. If a gap appears at a seam, close it with matching yarn.
- Optional: a tiny loop of green yarn at the back of the hat turns this into an ornament.
Care
Hand wash cold, squeeze (do not wring), and air dry. Do not machine dry. If the face embroidery loosens, restitch with Color E before the next gift-giving.
This is an original beginner toy design inspired by a well-known holiday grouch. It is not affiliated with or licensed by the characterβs owners.
Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk
Love this pattern?
Save this pattern to your free PurlJam libraryAccess your pattern anytime
Bookmark this page to access your pattern anytime