Type
Crochet
Difficulty
beginner
Category
amigurumi
AI Thinking Process
Planning
Verification
Pattern
Chubby Capybara with Yellow Flower
Beginner Low-Sew Amigurumi β US Crochet Terms
A round, sitting capybara worked as one chubby head-and-body piece, finished with a blunt snout, tiny ears, stubby legs, and a bright yellow flower. About 4 inches (10 cm) tall β perfect for a desk buddy, gift, or keychain.
Skill level: Beginner
Techniques used: Magic ring, single crochet, increase, decrease, chain, double crochet, sewing pieces together, simple embroidery
Finished Size
Approximately 4 inches (10 cm) tall and 2Β½ inches (6.5 cm) wide when made at the stated gauge with worsted yarn and a US E-4 (3.5 mm) hook. Size will change if you use a different hook, yarn, or stuffing amount.
Materials
Yarn (worsted weight / category 4 acrylic or cotton; small amounts unless noted)
- Color A β Golden brown / tan (body): 50 yards (46 m)
- Color B β Cream or light beige (snout): 8 yards (7 m)
- Color C β Yellow (flower): 6 yards (5.5 m)
- Color D β Leaf green: 2 yards (2 m)
- Color E β Dark brown or black (nose, mouth, flower center): 2 yards (2 m)
Other
- US E-4 (3.5 mm) crochet hook (use US F-5 / 3.75 mm only if your fabric is painfully tight)
- 6 mm or 8 mm safety eyes, 1 pair (or embroider eyes with Color E)
- Polyester fiberfill stuffing
- Yarn needle
- Stitch marker
- Scissors
- Straight pins
- Optional: pink embroidery floss or pastel blush for cheeks; 6β8 mm keychain finding and a 4-inch (10 cm) jump of yarn or jump ring
Safety note: Safety eyes are a choking hazard. Do not use them on toys for children under 3 years β embroider the eyes instead.
Gauge
5.5 sc and 6 rounds = 1 inch (2.5 cm) in single crochet worked in the round, in a tight amigurumi fabric.
Gauge is important for size, not for fit. If your sample is much looser than this, go down a hook size so stuffing will not show through.
Abbreviations (US)
- MR β magic ring
- ch β chain
- sc β single crochet
- inc β increase (2 sc in the same stitch)
- dec β invisible decrease (see Notes) or sc2tog
- hdc β half double crochet
- dc β double crochet
- sl st β slip stitch
- st(s) β stitch(es)
- rnd(s) β round(s)
- FO β fasten off
- [ ] β stitch count at end of round
Pattern Notes
- Use US crochet terms throughout. Sc is single crochet (UK dc).
- Head & Body, Legs, Ears, Snout, and Tail are worked in continuous spirals. Do not join or chain up at the end of a round. Mark the first stitch of every round and move the marker up as you go.
- Flower and Leaf are worked in joined rounds / short rows as written.
- Work tightly so the stuffing does not show. A hook 1β2 sizes smaller than the yarn label is normal for amigurumi.
- Invisible decrease: Insert hook under the front loop only of the next stitch, then under the front loop only of the following stitch (3 loops on hook). Yarn over and pull through both front loops (2 loops on hook). Yarn over and pull through both loops. This keeps the surface smooth.
- Magic ring alternative: Ch 2, work the stated number of sc into the 2nd ch from the hook, then pull the starting tail to close the hole.
- Stuff as you go. A chubby capybara needs firm stuffing, especially in the lower body so it sits upright.
- Stitch counts are confirmed in parentheses after each shaping round.
Head & Body
(Make 1 in Color A β golden brown. Worked from the top of the head down.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: Inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnd 3: (Sc, inc) around. [18] (6 increases β 12 + 6 = 18 β)
Rnd 4: (2 sc, inc) around. [24] (6 increases β 18 + 6 = 24 β)
Rnd 5: (3 sc, inc) around. [30] (6 increases β 24 + 6 = 30 β)
Rnd 6: (4 sc, inc) around. [36] (6 increases β 30 + 6 = 36 β)
Rnds 7β10: Sc around. [36] (4 rounds)
Place a spare piece of yarn or a pin to mark the front of the face (anywhere on Rnd 10 is fine; you will rotate the piece later if needed).
Rnd 11: (5 sc, inc) around. [42] (6 increases β 36 + 6 = 42 β)
Rnds 12β18: Sc around. [42] (7 rounds)
Insert safety eyes now (if using): place them between Rnds 8 and 9, 7 stitches apart, centered on the marked front. Do not snap the washers until you are happy with the spacing. Embroidered eyes are added later during finishing.
Rnd 19: (5 sc, dec) around. [36] (6 decreases β 42 β 6 = 36 β)
Rnd 20: (4 sc, dec) around. [30] (6 decreases β 36 β 6 = 30 β)
Rnd 21: (3 sc, dec) around. [24] (6 decreases β 30 β 6 = 24 β)
Stuff the head firmly and the body very firmly, rounding it into a chubby oval. Keep stuffing as you close.
Rnd 22: (2 sc, dec) around. [18] (6 decreases β 24 β 6 = 18 β)
Rnd 23: (Sc, dec) around. [12] (6 decreases β 18 β 6 = 12 β)
Rnd 24: Dec around. [6] (6 decreases β 12 β 6 = 6 β)
FO, leaving a 6-inch (15 cm) tail. Weave the tail through the front loops of the remaining 6 sts, pull closed, and hide the end inside the body.
Legs
(Make 4 in Color A.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: Inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnds 3β5: Sc around. [12] (3 rounds)
Stuff lightly β just enough to hold a round, stubby shape. FO, leaving a 12-inch (30 cm) tail for sewing.
Ears
(Make 2 in Color A.)
Rnd 1: 6 sc in MR. [6]
Rnd 2: (Sc, inc) around. [9] (3 increases β 6 + 3 = 9 β)
Rnd 3: Sc around. [9]
FO, leaving an 8-inch (20 cm) tail. Do not stuff. Flatten each ear into a small rounded disc.
Snout
(Make 1 in Color B β cream.)
Ch 5.
Rnd 1: 2 sc in 2nd ch from hook, sc in next 2 ch, 4 sc in last ch; rotate and work along the unused loops on the other side of the chain: sc in next 2 ch, 2 sc in the same ch as the first 2 sc. [12] (2 + 2 + 4 + 2 + 2 = 12 β)
Rnd 2: Sc around. [12]
Rnd 3: Sc around. [12]
FO, leaving a 12-inch (30 cm) tail. Stuff lightly just before sewing so the snout stays a blunt little oval.
Tail
(Make 1 in Color A. Optional, but it reads as a capybara.)
Rnd 1: 5 sc in MR. [5]
Sl st in the first sc to join. FO, leaving an 8-inch (20 cm) tail. Do not stuff.
Yellow Flower
(Make 1 in Color C β yellow.)
Make a MR.
(Ch 2, 2 dc, ch 2, sl st into the ring) 5 times. (5 petals β)
Pull the ring closed so the petals sit in a circle. FO, leaving a 10-inch (25 cm) tail for sewing.
With Color E, embroider a small French knot (or 3β4 tiny straight stitches) in the flower center.
Leaf
(Make 1 in Color D β green. Optional.)
Ch 6.
Starting in the 2nd ch from the hook: sl st, sc, hdc, dc, hdc. FO, leaving a 6-inch (15 cm) tail.
Assembly Guide
Pin every piece before you sew. Use Color A tails for brown pieces and matching tails for the snout, flower, and leaf. A yarn needle and whip stitch (or mattress stitch) work well. Hide all ends inside the body.
1. Snout
Center the snout on the front of the face, just below the eyes. The top edge should sit about 1 round below the eyes (covering roughly Rnds 9β12). Stuff it lightly, then sew all the way around. Keep it low and wide β that blunt muzzle is what makes it a capybara.
2. Nose and mouth (Color E)
On the snout, embroider a small inverted triangle or a short wide dash for the nose, centered near the outer end of the oval. Add a short vertical stitch down from the nose and a tiny curved smile on each side (a shallow βWβ or βYβ mouth). Optional: two tiny vertical stitches for nostrils.
3. Eyes, if embroidered
If you skipped safety eyes, stitch two small ovals or French knots in Color E between Rnds 8 and 9, 7 sts apart, just above the snout.
4. Ears
Flattened ears sit on the top sides of the head, spanning about Rnds 4β6. Leave about 10β12 sts between them across the top of the head so a little βbald spotβ remains for the flower. Sew along the lower edge only, letting the ears cup slightly.
5. Flower and leaf
Sew the yellow flower on the top of the head, slightly off-center β nestled beside one ear is the classic look. Tuck the leaf under one side of the flower and take a couple of stitches through both layers.
6. Legs (sitting pose)
All four legs attach around Rnds 17β19, at the lower sides of the body, so the capybara sits on its bottom.
- Front legs: on the face side, about 8 sts apart, angled slightly forward.
- Back legs: on the back side, about 8 sts apart, angled slightly out.
Sew around the open edge of each leg. After all four are on, set the toy on a table. If it wobbles, add a few extra stitches to pull a high leg down, or push a little more stuffing into the bottom of the body.
7. Tail
Sew the tail to the lower back, centered, around Rnds 16β17, just above the back legs.
8. Cheeks (optional)
Add a tiny bit of pink yarn (a few small satin stitches) or a dab of pastel blush on each side of the snout.
9. Keychain (optional)
Thread a 4-inch (10 cm) length of Color A through the top of the head (behind the flower), tie a firm knot inside the stuffing, and attach your keychain finding.
Finishing
- Check that no stuffing shows at the closed hole or at sewn joins. Add a stitch or two if needed.
- Steam is not required. If the flower petals curl, shape them with your fingers.
- Give the body a roll between your hands to even out the stuffing into a smooth chubby oval.
Care: Surface clean with a damp cloth. If the yarn is machine-washable acrylic, place the toy in a mesh bag and wash cold on gentle; air dry. Do not tumble dry. Remove a keychain finding before washing.
Stitch Count Recap
| Piece | Start | Max sts | End | Pieces |
|---|---|---|---|---|
| Head & Body | 6 | 42 | 6 | 1 |
| Leg | 6 | 12 | 12 | 4 |
| Ear | 6 | 9 | 9 | 2 |
| Snout | 12 | 12 | 12 | 1 |
| Tail | 5 | 5 | 5 | 1 |
| Flower | β | 5 petals | β | 1 |
| Leaf | ch 6 | β | β | 1 |
You sew on 4 legs + 2 ears + 1 snout + 1 flower + 1 leaf + 1 tail. The head and body are already one piece β that is the whole assembly.
Enjoy your little capybara. Once you have made one, the same body in a different brown, plus a new flower color, makes a whole desk herd.
Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk
Love this pattern?
Save this pattern to your free PurlJam libraryAccess your pattern anytime
Bookmark this page to access your pattern anytime