Type
Crochet
Difficulty
intermediate
Category
amigurumi
AI Thinking Process
Planning
Verification
Pattern
Classic Minion Amigurumi (Advanced)
A seamless, capsule-bodied Minion with blue denim overalls, goggle-and-eye face, stubby gloved arms, and shoe-booted legs. Finished height: approximately 8.5β9 inches standing.
MATERIALS
- Worsted weight yarn (4):
- Yellow (MC) β approx. 120 yds (body, arms, head)
- Blue (CC1) β approx. 40 yds (overalls, shoes/pants, straps, bib)
- Black (CC2) β approx. 25 yds (shoe toes, gloves, hair, mouth embroidery)
- Gray (CC3) β approx. 15 yds (goggle band and rims)
- Hook: US G-6 (4.0 mm) β sized down from label for a tight, stuffing-proof gauge
- 2 black safety eyes, 12mm (or 1 for a one-eyed "Stuart" variant β see note)
- Fiberfill stuffing
- Yarn needle, stitch marker, scissors
Gauge: 5 sc x 5 rounds = 1 inch, worked tightly in continuous spiral.
Abbreviations: sc (single crochet), inc (2 sc in same st), dec (invisible decrease: insert hook in front loops only of next 2 sts, yo, pull through both, yo, pull through both loops), st(s), rnd(s), sl st, ch, BLO/FLO (back/front loop only).
HEAD & BODY (one continuous piece β no neck seam)
Worked bottom-up in continuous spiral. Place marker at start of each round.
Base (Yellow) β widens to full body width:
- Rnd 1: 6 sc in magic ring (6)
- Rnd 2: inc around (12) (6 inc β 6+6=12 β)
- Rnd 3: (1 sc, inc) x6 (18) (12+6=18 β)
- Rnd 4: (2 sc, inc) x6 (24) (18+6=24 β)
- Rnd 5: (3 sc, inc) x6 (30) (24+6=30 β)
- Rnd 6: (4 sc, inc) x6 (36) (30+6=36 β)
- Rnd 7: (5 sc, inc) x6 (42) (36+6=42 β) β this is the widest point, forming the flat bottom disc.
Overalls section (switch to Blue):
- Rnds 8β14: sc even (42) β 7 rounds. This blue band forms the Minion's denim pants/overalls, front and back.
Upper body & head (switch to Yellow):
- Rnds 15β19: sc even (42) β 5 rounds (torso above the overalls).
- Rnd 20: sc even (42). Pause here to set the face (see FACE section) β insert goggle-backed safety eyes now, through the fabric, while it is still open enough to secure washers inside.
- Rnds 21β23: sc even (42) β 3 rounds, completing the cylinder/head area (this is one continuous shape β Minions have no separate head/neck).
Stuff firmly through the top opening now, packing the lower body first, adding more as rounds decrease.
Dome top (close head):
- Rnd 24: (5 sc, dec) x6 (36) (42-6=36 β)
- Rnd 25: (4 sc, dec) x6 (30) (36-6=30 β)
- Rnd 26: (3 sc, dec) x6 (24) (30-6=24 β)
- Rnd 27: (2 sc, dec) x6 (18) (24-6=18 β) β add final firm stuffing here.
- Rnd 28: (1 sc, dec) x6 (12) (18-6=12 β)
- Rnd 29: dec x6 (6) (12-6=6 β)
- Fasten off, pull tail through remaining 6 sts, cinch closed and weave in end.
Body height β 5.8", diameter β 2.7" β the classic tall-capsule Minion silhouette.
LEGS (make 2) β shoe + pant tube
Worked bottom-up; the wide toe rounds create a stable flat sole.
Shoe (Black):
- Rnd 1: 6 sc in magic ring (6)
- Rnd 2: inc around (12) (6+6=12 β)
- Rnd 3: (1 sc, inc) x6 (18) (12+6=18 β)
- Rnds 4β6: sc even (18) β 3 rounds, shoe body.
Leg/pant (switch to Blue):
- Rnd 7: (1 sc, dec) x6 (12) (18-6=12 β)
- Rnds 8β13: sc even (12) β 6 rounds.
- Fasten off leaving a long tail.
Stuff the shoe portion firmly for stability; stuff the leg portion lightly. Flatten the top opening (12 sts pinched flat = 6 sts front to 6 sts back) and whip stitch closed, then whip stitch the flattened top to the underside of the body, angling the two legs slightly outward for a stable stance. This "flatten and seam" technique prevents the finished Minion from rolling or tipping.
ARMS (make 2) β glove + arm tube
Glove (Black):
- Rnd 1: 6 sc in magic ring (6)
- Rnd 2: inc around (12) (6+6=12 β)
- Rnd 3: sc even (12) β 1 round.
Arm (switch to Yellow):
- Rnds 4β11: sc even (12) β 8 rounds.
- Fasten off leaving a long tail.
Stuff lightly (arms should be soft and slightly floppy, not rigid). Flatten the open top and whip stitch closed, then sew to the side of the body at the overalls/torso color-change line (around Rnd 14β15), angled slightly forward. Arms should reach approximately to the bottom of the overalls band.
JUMPER (OVERALLS) DETAILS
The blue Rnds 8β14 form the base pants/overall color. Complete the look with:
Bib (flat panel, Blue):
- Row 1: Ch 5, sc in 2nd ch from hook and each ch across (4 sc), turn.
- Rows 2β5: Ch 1, sc across (4 sc) β 4 rows.
- Fasten off. This creates a small rectangle (~1" x 1"). Sew it centered on the front torso, straddling the blue/yellow color-change line (Rnds 13β17), so the bib appears to overlap the pants top.
Straps (make 2, Blue):
- Ch 10, sl st in 2nd ch from hook and each ch across to form a firm cord.
- Sew one end to the top corners of the bib, cross over the shoulder, and sew the other end to the back waistline (Rnd 14) to mimic overall straps.
FACE
Goggle rims (make 2, Gray):
- Rnd 1: 6 sc in magic ring (6)
- Rnd 2: inc around (12) (6+6=12 β)
- Fasten off leaving a long tail. Do not stuff β these stay flat.
Goggle band (Gray, worked flat):
- Row 1: Ch 20, sc in 2nd ch from hook and each ch across (19 sc), turn.
- Rows 2β3: Ch 1, sc across (19 sc) β 2 rows.
- Fasten off.
Assembly (during body Rnd 20, as noted above):
- Center the gray band across the front of the head at the Rnd 20 line and pin.
- Center a goggle rim over each side of the band (spaced evenly for a two-eyed Minion, or a single centered rim for a one-eyed "Stuart" variant).
- Push a 12mm safety eye through the center of each goggle rim and directly through the band and body fabric at Rnd 20; secure the washer on the inside of the head before continuing to stuff and complete Rnds 21β29.
- Once the head is closed and fully assembled, whip stitch the goggle band and rims neatly around their edges to the head.
Mouth: Using black yarn and a yarn needle, embroider a wide smiling curve in backstitch or stem stitch below the goggle band, centered on the face.
Hair: Using black yarn, thread 2β3 short loops (about 1" tall) through the top center of the head and knot or tack in place to form the signature Minion hair tufts. Trim ends evenly or leave as loops.
ASSEMBLY & FINISHING
- Weave in all ends before assembly.
- Sew legs to the underside of the body, splayed slightly outward, flat seams down, for a stable freestanding pose.
- Sew arms to the sides of the body at the overalls/torso transition, angled slightly forward.
- Attach goggle band/rims and embroider mouth and hair as described above (goggles are set into the body construction; mouth and hair are added last).
- Sew bib and straps over the front/back torso.
- Steam-block lightly if yarn allows, to help the overalls band and bib lie flat.
Variant note: For a one-eyed "Stuart/Jerry" style Minion, use a single goggle rim and safety eye centered on the goggle band instead of two, and shorten the band accordingly (Ch 12 instead of Ch 20).
Your Minion is complete β approximately 8.5β9" tall, standing freely on his booted feet!
Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, and instructions before beginning your project. Generated by purlJam.uk
Love this pattern?
Save this pattern to your free PurlJam libraryAccess your pattern anytime
Bookmark this page to access your pattern anytime