Type
Crochet
Difficulty
beginner
Category
amigurumi
AI Thinking Process
Planning
Verification
Pattern
Sitting Fox Amigurumi
A chubby beginner fox worked from simple spheres, tubes, and cones. The head is a sphere, the body a short cylinder, the ears and tail are flattened or tapered tubes, and four stubby legs hold a sitting pose. DK yarn and basic single crochet are all you need.
Skill level: Beginner
Finished size: About 4Β½ in (11.5 cm) tall sitting, including ears
Yarn weight: DK / Light (3)
Materials
- MC (fox orange / rust): DK yarn, about 40 yd / 37 m (approx. 15 g)
- CC (cream / white): DK yarn, about 15 yd / 14 m (approx. 6 g)
- Black: small amount of DK yarn for nose and mouth (about 2 yd / 2 m)
- Optional pink scrap for cheeks
- US E-4 / 3.5 mm crochet hook (use US D-3 / 3.25 mm if your fabric shows gaps)
- Pair of 8 mm safety eyes or black yarn to embroider eyes
- Polyester fiberfill stuffing
- Yarn needle
- Stitch marker
- Straight pins
- Scissors
Safety note: Safety eyes are a choking hazard. Do not use them on toys for children under 3 years; embroider the eyes instead.
Gauge
11 sc and 12 rnds = 2 in (5 cm) in single crochet, worked in the round.
Gauge is not critical, but stitches must be tight enough that stuffing does not show. If you see holes, go down a hook size. With this gauge the sitting fox measures about 4Β½ in (11.5 cm) tall.
Abbreviations (US)
| Abbreviation | Meaning |
|---|---|
| CC | contrast color (white) |
| ch | chain |
| dec | single crochet 2 together (invisible decrease preferred) |
| FO | fasten off |
| inc | 2 single crochet in the same stitch |
| MC | main color (orange) |
| MR | magic ring |
| rnd(s) | round(s) |
| sc | single crochet |
| sl st | slip stitch |
| st(s) | stitch(es) |
Pattern Notes
- Work in continuous spirals unless stated. Do not join rounds. Mark the first stitch of every round and move the marker up as you go.
- Invisible decrease: insert hook through the front loops only of the next 2 stitches, yarn over, pull through both front loops, yarn over, pull through 2 loops.
- Stuff as you go β it is hard to fill the head and body after they are closed.
- Color change: work the last yarn over of the old color with the new color.
- Magic ring alternative: ch 2, work the stated number of sc into the 2nd ch from the hook, then continue in a spiral.
- Pin every piece in place and check the face from the front before sewing.
Head (MC)
Worked as a sphere.
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnd 3: (sc, inc) around. [18] (6 increases β 12 + 6 = 18 β)
Rnd 4: (2 sc, inc) around. [24] (6 increases β 18 + 6 = 24 β)
Rnd 5: (3 sc, inc) around. [30] (6 increases β 24 + 6 = 30 β)
Rnds 6β10: sc around. [30] (5 rounds)
Rnd 11: (3 sc, dec) around. [24] (6 decreases β 30 β 6 = 24 β)
Rnd 12: (2 sc, dec) around. [18] (6 decreases β 24 β 6 = 18 β)
Insert safety eyes between Rnds 7 and 8, with 5 stitches visible between them. Stuff the head firmly, filling the top first.
Rnd 13: (sc, dec) around. [12] (6 decreases β 18 β 6 = 12 β)
Rnd 14: dec around. [6] (6 decreases β 12 β 6 = 6 β)
FO, leaving a 12 in (30 cm) tail. Thread the tail through the front loops of the remaining 6 sts and pull closed. Weave in the end. (If you will embroider the eyes, do that during assembly instead of inserting safety eyes here.)
Body (MC)
Worked as a short cylinder, slightly smaller than the head.
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnd 3: (sc, inc) around. [18] (6 increases β 12 + 6 = 18 β)
Rnd 4: (2 sc, inc) around. [24] (6 increases β 18 + 6 = 24 β)
Rnds 5β12: sc around. [24] (8 rounds)
Rnd 13: (2 sc, dec) around. [18] (6 decreases β 24 β 6 = 18 β)
Stuff firmly, pushing filling into a slightly flattened sitting base.
Rnd 14: (sc, dec) around. [12] (6 decreases β 18 β 6 = 12 β)
Rnd 15: dec around. [6] (6 decreases β 12 β 6 = 6 β)
FO, close the hole as for the head, and weave in the end. The closed end is the bottom of the body; the beginning (Rnd 1) is the neck, where the head will sit.
Ears (make 2, MC)
Worked as small cones, then flattened into triangles. Do not stuff.
Rnd 1: 6 sc in MR. [6]
Rnd 2: (sc, inc) around. [9] (3 increases β 6 + 3 = 9 β)
Rnd 3: sc around. [9]
Rnd 4: (2 sc, inc) around. [12] (3 increases β 9 + 3 = 12 β)
Rnd 5: sc around. [12]
FO, leaving an 8 in (20 cm) tail. Flatten each ear into a triangle so the last round forms the base.
Muzzle (CC)
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnd 3: (2 sc, inc) around. [16] (4 increases β 12 + 4 = 16 β)
Rnd 4: sc around. [16]
FO, leaving a 12 in (30 cm) tail. Stuff lightly.
Chest Patch (CC)
Do not stuff. The patch is sewn flat.
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnd 3: (sc, inc) around. [18] (6 increases β 12 + 6 = 18 β)
FO, leaving a 12 in (30 cm) tail. Flatten into an oval.
Legs (make 4, MC)
Stubby tubes for a sitting pose.
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnds 3β6: sc around. [12] (4 rounds)
Stuff firmly. FO, leaving an 8 in (20 cm) tail. Do not close the last round β the open edge is sewn to the body.
Tail (start CC, change to MC)
A tapered tube with a white tip.
With CC:
Rnd 1: 6 sc in MR. [6]
Rnd 2: (sc, inc) around. [9] (3 increases β 6 + 3 = 9 β)
Rnd 3: sc around. [9]
Change to MC.
Rnd 4: (2 sc, inc) around. [12] (3 increases β 9 + 3 = 12 β)
Rnds 5β12: sc around. [12] (8 rounds)
Stuff lightly so the tail can curve. FO, leaving a 10 in (25 cm) tail. Do not close the last round.
Assembly
Pin every piece and check the face from the front before you sew. Use matching yarn and a whip stitch unless noted.
1. Muzzle. Center the muzzle on the lower half of the head, covering Rnds 9β13, with the top edge about 1 rnd below the eyes. Sew all the way around, adding a pinch more stuffing just before closing if the snout looks flat.
2. Nose and mouth. With black yarn, embroider a small filled triangle on the upper center of the muzzle for the nose. Add a short vertical stitch down from the triangle and a tiny upside-down Y or gentle curve for the mouth.
3. Eyes (if embroidered). With black yarn, stitch two small filled circles between Rnds 7 and 8, 5 sts apart, to match the safety-eye placement.
4. Ears. Flattened base of each ear sits on Rnds 3β6 of the head, slightly toward the back, angled outward like a V. The inner (flattened) faces should tilt a little forward. Sew securely across the 12-st base.
5. Optional inner-ear color. With CC, make a few satin stitches on the front of each ear, or leave the ears solid orange.
6. Head to body. Pin the head on the neck (Rnd 1 end of the body). The muzzle should face forward. Sew around, adding stuffing at the neck so the head does not wobble.
7. Chest. Pin the white chest patch to the front of the body, covering about Rnds 5β10, just under the chin. Sew around the edge.
8. Front legs. Sew two legs to the upper front of the body, one on each side of the chest, spanning about Rnds 5β8, angled slightly forward so the fox can βrestβ on them.
9. Back legs. Sew the remaining two legs to the lower sides of the body, spanning about Rnds 10β13, pointing forward in a sitting pose. The fox should sit level; add or remove a little stuffing in a leg if it tips.
10. Tail. Sew the open end of the tail to the lower back of the body, at about Rnds 12β14, just above the sitting line. Curve the tail around one hip.
11. Cheeks (optional). With pink yarn, add 2β3 tiny stitches on each side of the muzzle, or brush on a little unscented pastel.
Weave in every remaining end. Steam is not needed; a firm squeeze shapes the stuffing.
Finishing Checklist
- [ ] No stuffing showing through stitches
- [ ] Eyes level and 5 stitches apart
- [ ] Muzzle centered under the eyes
- [ ] Ears mirrored
- [ ] Fox sits without tipping
- [ ] All yarn tails woven in
Your sitting fox is finished. Make a second one in arctic white, or add a tiny scarf in leftover DK.
Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk
Love this pattern?
Save this pattern to your free PurlJam libraryAccess your pattern anytime
Bookmark this page to access your pattern anytime