Type
Crochet
Difficulty
beginner
Category
amigurumi
AI Thinking Process
Planning
Verification
Pattern
Charmander-Inspired Amigurumi Keychain
Skill level: Beginner
Unofficial fan pattern for personal use only. Not affiliated with PokΓ©mon, Nintendo, or Game Freak.
A sitting fire-lizard toy made from basic amigurumi shapes: a round head, egg-shaped body, simple cylinders for arms and legs, a cone tail, and a small flame. Designed as a bag charm or keychain.
Finished size
About 5 in (12.5 cm) tall sitting, from seat to top of head, with worsted yarn and a US E-4 (3.5 mm) hook at the stated gauge.
For closer to 6 in (15 cm), use a US G-6 (4.0 mm) hook. Finished size will vary with stuffing and sewing overlap.
Materials
Yarn β worsted weight (category 4), acrylic or cotton-blend
- Color A (orange): 40 yd (37 m)
- Color B (cream): 10 yd (9 m)
- Color C (yellow): 8 yd (7 m)
- Color D (red or dark orange): 5 yd (5 m)
- Black and white: small amounts for embroidery (omit white if using safety eyes)
Hook: US E-4 / 3.5 mm (or US G-6 / 4.0 mm for a larger toy). Use a hook 1β2 sizes smaller than the yarn label so the fabric is tight.
Notions
- Polyester fiberfill
- Yarn needle
- Stitch marker
- Pins
- Scissors
- Keychain finding (lobster clasp, jump ring, or split ring)
- Optional: 8 mm safety eyes (pair)
Safety note: Safety eyes are a choking hazard for children under 3 years. Embroider the eyes if the keychain will be used by a young child or if you prefer a sewn-only finish.
Gauge
5 sc and 5 rnds = 1 in (2.5 cm) in single crochet, worked in the round.
Work tightly. You should not see stuffing through the stitches. Gauge is important for size: at this gauge the sitting toy is about 5 in (12.5 cm). A looser gauge or larger hook makes a bigger Charmander.
Abbreviations (US)
- MR β magic ring
- ch β chain
- sc β single crochet
- inc β increase (2 sc in the same stitch)
- dec β invisible decrease (single crochet 2 stitches together)
- sl st β slip stitch
- st(s) β stitch(es)
- rnd(s) β round(s)
- FO β fasten off
- [ ] β stitch count at end of round or row
Pattern notes
- Pieces are worked in a continuous spiral unless a row is specified (belly). Do not join at the end of each round.
- Place a stitch marker in the first stitch of every round and move it up as you go.
- Use an invisible decrease for a smooth surface.
- Stuff as you go. Add fiberfill during the last 2β3 decrease rounds; it is hard to stuff later.
- Leave long tails (about 8 in / 20 cm) on pieces that will be sewn.
- Pin every piece in place and check the sitting pose before sewing.
- Color A is orange unless noted.
Head (Color A)
Worked as a sphere.
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 increases β 6 + 6 = 12 β)
Rnd 3: (sc, inc) 6 times. [18] (6 increases β 12 + 6 = 18 β)
Rnd 4: (2 sc, inc) 6 times. [24] (6 increases β 18 + 6 = 24 β)
Rnds 5β8: sc in each st around. [24] β 4 even rounds
Eye placement (do this before decreasing):
If using 8 mm safety eyes, insert them between Rnds 6 and 7, with 4β5 stitches between the posts, on the front of the head. Do not fasten the washers until you are happy with the spacing. For embroidered eyes, mark the same spots with pins and stitch after assembly.
Rnd 9: (2 sc, dec) 6 times. [18] (6 decreases β 24 β 6 = 18 β)
Rnd 10: (sc, dec) 6 times. [12] (6 decreases β 18 β 6 = 12 β)
Stuff the head firmly, shaping it into a round ball.
Rnd 11: dec 6 times. [6] (6 decreases β 12 β 6 = 6 β)
FO, leaving a long tail. Thread the tail through the remaining 6 stitches, pull closed, and weave in. Head is about 2ΒΌ in (5.5 cm) in diameter.
Body (Color A)
Worked as a slightly elongated sphere (egg shape).
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12]
Rnd 3: (sc, inc) 6 times. [18]
Rnd 4: (2 sc, inc) 6 times. [24]
Rnd 5: (3 sc, inc) 6 times. [30] (6 increases β 24 + 6 = 30 β)
Rnds 6β12: sc in each st around. [30] β 7 even rounds
Rnd 13: (3 sc, dec) 6 times. [24] (6 decreases β 30 β 6 = 24 β)
Rnd 14: (2 sc, dec) 6 times. [18] (6 decreases β 24 β 6 = 18 β)
Stuff firmly, with extra filling toward the bottom so the body sits well.
Rnd 15: (sc, dec) 6 times. [12] (6 decreases β 18 β 6 = 12 β)
Add a last bit of stuffing.
Rnd 16: dec 6 times. [6] (6 decreases β 12 β 6 = 6 β)
FO, close the hole as for the head, and weave in. Body is about 3ΒΌ in (8 cm) tall.
Belly patch (Color B)
Worked flat in turned rows. The right side is the side facing you on odd-numbered rows.
Ch 6.
Row 1: sc in 2nd ch from hook and in each ch across. [5]
Row 2: ch 1, turn, inc, 3 sc, inc. [7] (2 increases β 5 + 2 = 7 β)
Row 3: ch 1, turn, inc, 5 sc, inc. [9] (2 increases β 7 + 2 = 9 β)
Rows 4β6: ch 1, turn, sc in each st across. [9]
Row 7: ch 1, turn, dec, 5 sc, dec. [7] (2 decreases β 9 β 2 = 7 β)
Row 8: ch 1, turn, dec, 3 sc, dec. [5] (2 decreases β 7 β 2 = 5 β)
FO, leaving a long tail for sewing.
Arms (make 2, Color A)
Rnd 1: 6 sc in MR. [6]
Rnd 2: (sc, inc) 3 times. [9] (3 increases β 6 + 3 = 9 β)
Rnds 3β6: sc in each st around. [9] β 4 even rounds
Stuff lightly (leave the opening half empty so the arm sews flat against the body). FO, leaving a long tail. Do not close the opening.
Legs (make 2, Color A)
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12]
Rnds 3β6: sc in each st around. [12] β 4 even rounds
Stuff firmly. FO, leaving a long tail. Do not close the opening.
Tail (Color A)
Worked as a cone, starting at the tip.
Rnd 1: 4 sc in MR. [4]
Rnd 2: (sc, inc) 2 times. [6] (2 increases β 4 + 2 = 6 β)
Rnd 3: sc in each st around. [6]
Rnd 4: (2 sc, inc) 2 times. [8] (2 increases β 6 + 2 = 8 β)
Rnd 5: sc in each st around. [8]
Rnd 6: (3 sc, inc) 2 times. [10] (2 increases β 8 + 2 = 10 β)
Rnd 7: sc in each st around. [10]
Rnd 8: (4 sc, inc) 2 times. [12] (2 increases β 10 + 2 = 12 β)
Rnds 9β12: sc in each st around. [12] β 4 even rounds
Stuff lightly β firm at the base (open end), softer toward the tip so the tail can curve. FO, leaving a long tail. Do not close the opening. Tail is about 2Β½ in (6.5 cm) long.
Outer flame (Color C β yellow)
Worked as a small teardrop, starting at the tip.
Rnd 1: 4 sc in MR. [4]
Rnd 2: inc in each st around. [8]
Rnd 3: (sc, inc) 4 times. [12] (4 increases β 8 + 4 = 12 β)
Rnd 4: sc in each st around. [12]
Rnd 5: (2 sc, dec) 3 times. [9] (3 decreases β 12 β 3 = 9 β)
Rnd 6: (sc, dec) 3 times. [6] (3 decreases β 9 β 3 = 6 β)
Rnd 7: (sc, dec) 2 times. [4] (2 decreases β 6 β 2 = 4 β)
Stuff very lightly at the wide base only. FO, leaving a tail. Thread through the last 4 stitches, pull into a rounded point, and shape the piece into a flame (pinch one side so it is not a perfect cone).
Inner flame (Color D β red)
Rnd 1: 4 sc in MR. [4]
Rnd 2: (sc, inc) 2 times. [6]
Rnd 3: sc in each st around. [6]
Rnd 4: (sc, dec) 2 times. [4]
Do not stuff. FO, close the tip, and leave a tail for sewing. This piece is a small pointed teardrop.
Assembly
Use pins first. Check that the toy sits upright before you sew. Whipstitch with matching yarn unless noted.
1. Belly. Center the cream oval on the front of the body. The wide middle of the oval should sit over Rnds 7β10 of the body, with the top of the oval near Rnd 6 (chest) and the bottom near Rnd 13. Sew all around with Color B.
2. Head to body. Pin the head on top of the body, slightly toward the front (Charmanderβs head is a little forward). The closed top of the body meets the lower third of the head. Sew securely all the way around with Color A, adding a pinch of stuffing in the neck if it looks sunken.
3. Legs (sitting pose). Pin the open edge of each leg to the lower front-sides of the body, just below the belly, angled forward and slightly out. The toy should sit on the bottom of the body with the legs as a base. Sew the open edges to the body.
4. Arms. Pin the open edge of each arm to the sides of the body, just below the head/body join (about Rnds 6β8 of the body). Angle them slightly forward. Sew in place.
5. Tail. Pin the open (wide) end of the tail to the lower back of the body, opposite the belly, so the tail sweeps out and slightly up. Sew the opening to the body. Tack the tail with 1β2 hidden stitches along the back if you want a gentle curve.
6. Flame. Sew the red inner flame onto the front of the yellow outer flame, offset toward the tip. Then sew the base of the yellow flame over the tip of the tail so the flame sits on the end, pointing up and back. A few extra stitches through the tail tip will keep it from flopping.
Face (embroidery)
Use black yarn or embroidery floss and small straight stitches. Work after the head is sewn on so you can see the expression from the front.
If you did not use safety eyes:
With white, stitch a small vertical oval for each eye (about β
in / 1 cm tall) over Rnds 6β7, 4β5 stitches apart. With black, stitch a round pupil in the lower half of each white oval. Add a tiny white highlight stitch in each pupil.
If you used safety eyes:
Optional: stitch a small white highlight next to each eye.
Mouth: A small curved smile in black, 2 rounds below the eyes and centered. Keep it simple β 3β4 stitches.
Nostrils (optional): Two tiny vertical stitches in black, just above the mouth, 1 stitch apart.
Do not over-embroider; the beginner version reads clearly with eyes and a small smile only.
Keychain attachment
Thread Color A (or a jump ring) through the top center of the head (Rnd 1β2 area).
Yarn loop method: Make a Β½ in (1.25 cm) chain-stitch or doubled-yarn loop, sew it down firmly through several head stitches, and weave in. Clip the keychain finding through the loop.
Hardware method: Open a jump ring, pass it under 2β3 tight stitches at the crown, close the ring, and attach the lobster clasp.
Tug-test the attachment before using the keychain.
Finishing
- Weave in every remaining tail on the inside or under a sewn seam.
- Steam is not needed. If a piece looks lumpy, massage the stuffing through the fabric.
- Check that no stuffing shows. If it does, your gauge was too loose β this toy is already finished, but work more tightly next time.
Care: Spot-clean only. Do not machine-wash if you used safety eyes or a metal finding.
Quick reference β piece list
| Piece | Color | Shape | Max sts | Make |
|---|---|---|---|---|
| Head | A | Sphere | 24 | 1 |
| Body | A | Egg | 30 | 1 |
| Belly | B | Flat oval | 9 | 1 |
| Arm | A | Cylinder | 9 | 2 |
| Leg | A | Cylinder | 12 | 2 |
| Tail | A | Cone | 12 | 1 |
| Outer flame | C | Teardrop | 12 | 1 |
| Inner flame | D | Teardrop | 6 | 1 |
Sitting height at gauge: about 5 in (12.5 cm). Use a 4.0 mm hook if you want the toy nearer 6 in (15 cm).
Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk
Love this pattern?
Save this pattern to your free PurlJam libraryAccess your pattern anytime
Bookmark this page to access your pattern anytime