← Back to Home

purlJam

Custom Pattern

Type

Crochet

Difficulty

beginner

Category

amigurumi

🎨 Want a Custom Pattern?

Generate your own personalized crochet patterns with PurlJam AI - free and instant!

Create Your Pattern
Generated preview image for Leebit
Generated image is inspiration only. Follow the written pattern for stitch counts, measurements, and construction details.
Stitch chart guide image for Leebit
Attached stitch chart guide image. Follow the written pattern and chart instructions for placement, stitch counts, and row order.
AI Thinking Process

Planning

1. **Design Strategy**: Beginner sitting Leebit (MapleStory-inspired white rabbit) built from simple amigurumi spheres, short tubes, and flat ovals. Chibi proportions (large head, round body), pink inner ears, embroidered face, optional tiny carrot. Worsted yarn and tight single crochet only. 2. **Construction Plan**: Work each piece in continuous rounds (ears as flat ovals around a chain), stuff as you go, then whipstitch closed pieces together with pinned placement. 3. **Quality Assurance**: - Pin ears and limbs before sewing; wide or low ears lose the Leebit look. - Stuff head and body firmly so spheres stay round after joining. - Insert safety eyes before closing the head. 4. **Final Calculations**: Gauge 5 sc Γ— 5 rnds = 1" (2.5 cm) in sc in the rnd. Head max 30 sts; body max 24 sts. Sitting height about 4" (10 cm); about 5Β½" (14 cm) including ears.

Verification

[PRE-FLIGHT CHECKS] 1. **Completeness**: Title, skill, size, materials, gauge, abbreviations, notes, all pieces (head, body, ears, arms, legs, tail, optional carrot), face, assembly, finishing β€” present. 2. **Consistency**: Sphere/tube/oval counts match gauge and ~4" sitting size; every increase/decrease round checked. 3. **Constraints**: User asked for Leebit at beginner level in worsted; template adapted to a simple-shape rabbit (user request takes precedence over β€œnot animals”). 4. **Safety**: Safety-eye warning for under age 3; no math errors found. 5. **Fix before writing**: None required.

Pattern

Leebit

Beginner Sitting Rabbit Plush (MapleStory-Inspired)

A chubby white rabbit worked from simple spheres, short tubes, and flat ear ovals. Only single crochet, increases, and decreases are used. Perfect as a desk buddy, gift, or first character-style amigurumi.

Skill level: Beginner
Finished size: About 4" (10 cm) tall sitting; about 5Β½" (14 cm) including ears, in worsted weight at given gauge.


Materials

Yarn (worsted weight / category 4; acrylic or cotton-blend recommended)

  • MC (White): 55 yd (50 m)
  • CC1 (Light pink): 15 yd (14 m) β€” inner ears, nose, optional blush
  • CC2 (Black): small amount β€” mouth (optional if using safety eyes)
  • CC3 (Orange): 8 yd (7 m) β€” optional carrot
  • CC4 (Green): 4 yd (4 m) β€” optional carrot tops

Hook: US E-4 / 3.5 mm (go down a size if your fabric is loose or stuffing shows)

Notions

  • Polyester fiberfill
  • Yarn needle
  • Stitch marker
  • 8 mm safety eyes (1 pair)
  • Pins for assembly
  • Scissors
  • Optional: keychain finding; pink felt instead of crocheted inner ears

Safety note: Safety eyes are a choking hazard. Do not use them on toys for children under 3; embroider eyes instead.


Gauge

5 sc and 5 rnds = 1" (2.5 cm) in sc, worked tightly in the round.

Gauge is not critical for fit, but it controls size and fabric density. Your fabric should be firm enough that stuffing does not show through. If stitches look holey, go down a hook size.

At this gauge, the head (30 sts around) is about 2ΒΌ" (5.5 cm) tall.


Abbreviations (US)

  • ch β€” chain
  • sc β€” single crochet
  • inc β€” increase (2 sc in same stitch)
  • dec β€” invisible decrease (insert hook in front loop of next 2 sts, yarn over, pull through both, yarn over, pull through 2)
  • MR β€” magic ring (adjustable ring)
  • sl st β€” slip stitch
  • st(s) β€” stitch(es)
  • rnd(s) β€” round(s)
  • FO β€” fasten off
  • MC / CC β€” main color / contrasting color

Pattern Notes

  • Work in continuous spirals unless stated. Do not join or turn at the end of a round.
  • Place a stitch marker in the first stitch of each round and move it up as you go.
  • Use the invisible decrease for a smooth surface.
  • Stuff firmly as you go. Closed spheres are hard to restuff later.
  • Leave long tails (about 12" / 30 cm) on pieces that will be sewn.
  • Numbers in brackets are the stitch count at the end of the round.
  • Inline checks (βœ“) confirm the math for that round.

Head (MC β€” white)

Worked as a sphere.

Rnd 1: 6 sc in MR. [6]
Rnd 2: Inc in each st around. [12] (6 inc β†’ 6 + 6 = 12 βœ“)
Rnd 3: (Sc, inc) around. [18] (6 inc β†’ 12 + 6 = 18 βœ“)
Rnd 4: (2 sc, inc) around. [24] (6 inc β†’ 18 + 6 = 24 βœ“)
Rnd 5: (3 sc, inc) around. [30] (6 inc β†’ 24 + 6 = 30 βœ“)
Rnds 6–10: Sc around. [30] (5 even rounds)

Place eyes between Rnds 7 and 8, 6 sts apart, centered on the face. Lock washers on the inside before continuing. (Embroider eyes later if the toy is for a child under 3.)

Rnd 11: (3 sc, dec) around. [24] (6 dec β†’ 30 βˆ’ 6 = 24 βœ“)
Rnd 12: (2 sc, dec) around. [18] (6 dec β†’ 24 βˆ’ 6 = 18 βœ“)
Stuff the head firmly, filling the top first and shaping a round ball.
Rnd 13: (Sc, dec) around. [12] (6 dec β†’ 18 βˆ’ 6 = 12 βœ“)
Rnd 14: Dec around. [6] (6 dec β†’ 12 βˆ’ 6 = 6 βœ“)

FO, leaving a long tail. Thread tail through the front loops of the remaining 6 sts and pull closed. Weave in the end.


Body (MC β€” white)

Worked as a slightly smaller sphere.

Rnd 1: 6 sc in MR. [6]
Rnd 2: Inc in each st around. [12] (6 inc β†’ 12 βœ“)
Rnd 3: (Sc, inc) around. [18] (6 inc β†’ 18 βœ“)
Rnd 4: (2 sc, inc) around. [24] (6 inc β†’ 24 βœ“)
Rnds 5–9: Sc around. [24] (5 even rounds)
Rnd 10: (2 sc, dec) around. [18] (6 dec β†’ 24 βˆ’ 6 = 18 βœ“)
Stuff firmly.
Rnd 11: (Sc, dec) around. [12] (6 dec β†’ 18 βˆ’ 6 = 12 βœ“)
Rnd 12: Dec around. [6] (6 dec β†’ 12 βˆ’ 6 = 6 βœ“)

FO, leaving a long tail for sewing. Close the hole as for the head. The body should be a round ball a little smaller than the head.


Outer Ears (make 2, MC β€” white)

Worked as a flat oval around a starting chain. Do not stuff. Flatten as you go.

Ch 10.

Rnd 1: Sc in 2nd ch from hook, sc in next 7 ch, 3 sc in last ch; rotate to work along the opposite side of the chain, sc in next 7 ch, 2 sc in the same ch as the first sc. [20] (8 + 3 + 7 + 2 = 20 βœ“)

Rnd 2: Inc, 7 sc, inc in next 3 sts, 7 sc, inc in next 2 sts. [26] (2 + 7 + 6 + 7 + 4 = 26 βœ“)

Rnds 3–4: Sc around. [26]

FO, leaving a long tail for sewing. Flatten into a long oval. The white border will show around the pink inner ear.


Inner Ears (make 2, CC1 β€” pink)

Ch 8.

Rnd 1: Sc in 2nd ch from hook, sc in next 5 ch, 3 sc in last ch; rotate, sc in next 5 ch, 2 sc in the same ch as the first sc. [16] (6 + 3 + 5 + 2 = 16 βœ“)

Rnd 2: Inc, 5 sc, inc in next 3 sts, 5 sc, inc in next 2 sts. [22] (2 + 5 + 6 + 5 + 4 = 22 βœ“)

FO, leaving a tail for sewing. Flatten.

Felt shortcut: Cut two pink ovals about 1ΒΎ" Γ— ΒΎ" (4.5 Γ— 2 cm) instead of crocheting inner ears.


Arms (make 2, MC β€” white)

Rnd 1: 6 sc in MR. [6]
Rnd 2: (Sc, inc) around. [9] (3 inc β†’ 6 + 3 = 9 βœ“)
Rnds 3–5: Sc around. [9] (3 even rounds)

Stuff lightly. FO, leaving a long tail. Do not close; sew the open edge to the body.


Legs (make 2, MC β€” white)

Rnd 1: 6 sc in MR. [6]
Rnd 2: Inc in each st around. [12] (6 inc β†’ 12 βœ“)
Rnds 3–6: Sc around. [12] (4 even rounds)

Stuff firmly. FO, leaving a long tail. Do not close; sew the open edge to the body.


Tail (MC β€” white)

Rnd 1: 6 sc in MR. [6]
Rnd 2: Inc in each st around. [12] (6 inc β†’ 12 βœ“)
Rnd 3: Sc around. [12]
Rnd 4: Dec around. [6] (6 dec β†’ 12 βˆ’ 6 = 6 βœ“)

Stuff firmly. FO, leaving a long tail. Close the hole as for the head.


Optional Carrot (CC3 β€” orange; leaves in CC4 β€” green)

A small cone Leebit can hold.

Rnd 1: 4 sc in MR. [4]
Rnd 2: (Sc, inc) around. [6] (2 inc β†’ 4 + 2 = 6 βœ“)
Rnd 3: Sc around. [6]
Rnd 4: (2 sc, inc) around. [8] (2 inc β†’ 6 + 2 = 8 βœ“)
Rnd 5: Sc around. [8]
Rnd 6: (3 sc, inc) around. [10] (2 inc β†’ 8 + 2 = 10 βœ“)
Rnd 7: Sc around. [10]
Rnd 8: (4 sc, inc) around. [12] (2 inc β†’ 10 + 2 = 12 βœ“)
Rnds 9–11: Sc around. [12] (3 even rounds)

Stuff firmly. FO, leaving a tail. Close the hole.

Leaves: With green, join at the closed (wide) end. (Ch 6, sl st in 2nd ch from hook and in each of next 4 ch, sl st to the carrot) 3 times. FO and weave in.


Face

All embroidery is done after the head is closed, using the yarn needle.

Nose: With pink (CC1), embroider a small filled triangle or β€œY” centered 1 rnd below the eyes, about 2 sts wide and 2 rnds tall. Keep it tiny β€” Leebit’s face is mostly cheeks.

Mouth (optional): With black, stitch a small straight line or shallow β€œw” 1 rnd below the nose, no more than 3 sts wide.

Blush (optional): With pink, make 2–3 tiny overlapping stitches on each cheek, just outside and slightly below the eyes. Do not pull tight.

If you skipped safety eyes, embroider two small black ovals or French knots between Rnds 7 and 8, 6 sts apart.


Assembly

Pin every piece before sewing. Check placement from the front and both sides. Use whipstitch and matching yarn. Hide knots inside the stuffing when you can.

1. Ears
Center one pink inner ear on each white outer ear, leaving an even white border. Sew the pink piece down with pink yarn, catching only the inner layer so stitches do not show on the back.

Fold the bottom Β½" (1.3 cm) of each finished ear in half (white sides together) so the ear cups slightly. Pin to the head over Rnds 4–6, with the inner (folded) edges about 3 sts apart at the top center of the head. The ears should sit high and tilt slightly outward. Sew securely through both layers of the fold.

2. Head to body
Pin the head on top of the body, slightly toward the front so Leebit looks down a little. The join covers about Rnds 12–14 of the head and Rnds 1–3 of the body. Sew all the way around with white yarn, adding a pinch of extra stuffing at the neck if the join looks dented.

3. Legs (sitting pose)
Pin the open edge of each leg to the lower front of the body, angled forward and slightly out, spanning about Rnds 8–11 of the body. The legs should let the toy sit flat. Sew around the open edge.

4. Arms
Pin the open edge of each arm to the sides of the body, just below the head, at about Rnds 4–6 of the body. Angle them slightly forward. Sew around the open edge. If using the carrot, sew one arm so the paw can be stitched to the carrot later.

5. Tail
Sew the tail to the lower back of the body, centered, at about Rnds 8–10.

6. Carrot (optional)
Tack the carrot to one paw and, if you like, to the side of the body so it stays put.

Weave in every remaining end.


Finishing

  • Roll the head and body between your palms to round out any flat spots.
  • Steam is optional and light only β€” do not crush the stuffing. Acrylic holds shape well without blocking.
  • For a keychain, sew a finding through the top of the head, between the ears, going through several stitches for strength.

Size notes

  • Larger Leebit (about 6–7" / 15–18 cm sitting): use bulky (5) yarn and a US G-6 / 4.0 mm hook; same stitch counts.
  • Smaller / keychain (about 3" / 7.5 cm sitting): use DK (3) yarn and a US D-3 / 3.25 mm hook; same stitch counts.

Your Leebit is finished β€” a round little rabbit with tall pink-lined ears, ready to sit on a shelf or in a pocket.

Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk

Access your pattern anytime

Bookmark this page to access your pattern anytime

Generate Another