Type
Crochet
Difficulty
intermediate
Category
amigurumi
AI Thinking Process
Planning
Verification
Pattern
Moltres Amigurumi
Skill level: Intermediate
Finished size: About 8 in (20 cm) tall including crest, 7 in (18 cm) wingspan (worsted, gauge as given)
A stylized legendary firebird in classic amigurumi construction: separate head, body, wings, legs, flame tail, and crest.
Materials
- Worsted weight yarn:
- Color A (orange): ~80 yd (73 m)
- Color B (gold/yellow): ~40 yd (37 m)
- Color C (cream/pale yellow): ~15 yd (14 m)
- Color D (gray): small amount (beak, claws)
- US E/4 (3.5 mm) crochet hook
- 9 mm safety eyes (2), or black embroidery
- Polyester fiberfill
- Yarn needle, stitch markers, scissors, pins
Gauge
16 sc × 16 rnds = 4 in (10 cm) in continuous sc, unblocked.
Gauge affects size, not fit. Tight stitches hide stuffing.
Abbreviations (US)
MR – magic ring
sc – single crochet
inc – 2 sc in same st
inv-dec – invisible decrease
sl st – slip stitch
ch – chain
st(s) – stitch(es)
rnd – round
BLO – back loop only
FO – fasten off
Work in continuous spirals unless noted. Mark first st of each rnd.
Head (Color A)
Rnd 1: 6 sc in MR (6)
Rnd 2: inc around (12) (6 inc → 6 + 6 = 12 ✓)
Rnd 3: (sc, inc) around (18)
Rnd 4: (2 sc, inc) around (24)
Rnd 5: (3 sc, inc) around (30)
Rnd 6: (4 sc, inc) around (36)
Rnds 7–12: sc around (36) — 6 rnds
Rnd 13: (4 sc, inv-dec) around (30)
Rnd 14: (3 sc, inv-dec) around (24)
Safety eyes: Insert between Rnds 10 and 11, about 7 sts apart, centered on face.
Stuff firmly as you close.
Rnd 15: (2 sc, inv-dec) around (18)
Rnd 16: (sc, inv-dec) around (12)
Rnd 17: inv-dec around (6)
FO, weave through remaining sts, close. Leave 12 in (30 cm) tail for sewing.
Face accent (optional, Color C): Embroider a small cream oval under each eye or surface-crochet 4–5 sc in a shallow U.
Body (Color A)
Rnd 1: 6 sc in MR (6)
Rnd 2: inc around (12)
Rnd 3: (sc, inc) around (18)
Rnd 4: (2 sc, inc) around (24)
Rnd 5: (3 sc, inc) around (30)
Rnd 6: (4 sc, inc) around (36)
Rnd 7: (5 sc, inc) around (42)
Rnds 8–16: sc around (42) — 9 rnds
Rnd 17: (5 sc, inv-dec) around (36)
Rnd 18: sc around (36)
Rnd 19: (4 sc, inv-dec) around (30)
Rnds 20–21: sc around (30)
Rnd 22: (3 sc, inv-dec) around (24)
Stuff firmly, oval shape (wider at chest).
Rnd 23: (2 sc, inv-dec) around (18)
Rnd 24: (sc, inv-dec) around (12)
FO, leave long tail. Do not close fully if sewing head over opening; otherwise close.
Wings (make 2)
Start Color A.
Rnd 1: 6 sc in MR (6)
Rnd 2: inc around (12)
Rnd 3: (sc, inc) around (18)
Rnds 4–6: sc around (18)
Change to Color B.
Rnds 7–8: sc around (18)
Rnd 9: (sc, inv-dec) around (12)
Lightly stuff base only (leave flame tip flatter).
Rnd 10: (sc, inv-dec) around (8)
Rnd 11: sc around (8)
Flatten; sc through both layers across 4 sts to close. FO, leave tail for sewing.
Flame tips (Color B, 2 per wing, optional):
Ch 6, sc in 2nd ch from hook, hdc, dc, hdc, sc. FO. Sew along outer wing edge for jagged flames.
Tail (flame, Color A then B)
Color A.
Rnd 1: 6 sc in MR (6)
Rnd 2: inc around (12)
Rnd 3: (sc, inc) around (18)
Rnds 4–7: sc around (18)
Change to Color B.
Rnds 8–10: sc around (18)
Rnd 11: (sc, inv-dec) around (12)
Lightly stuff.
Rnd 12: inv-dec around (6)
FO, close.
Extra flame plumes (Color B, make 3):
Ch 8, sc in 2nd ch, sc, hdc, dc, dc, hdc, sc. FO. Sew around tail tip, fanned.
Crest (Color B)
Row 1: Ch 11, sc in 2nd ch from hook and across (10), ch 1, turn
Row 2: sc 10, ch 1, turn
Row 3: sc 3, hdc, (dc, ch 2, sl st in 2nd ch, dc) in next st, hdc, sc 4. FO.
Shape is a small flame comb. Make 2–3 and layer on crown.
Alternate crest (worked in rnds): 6 sc in MR, (sc, inc) × 3 (9), sc 9 for 2 rnds, flatten and sc across. FO.
Beak (Color D)
Rnd 1: 4 sc in MR (4)
Rnd 2: (sc, inc) twice (6)
Rnd 3: sc around (6)
Rnd 4: (2 sc, inc) twice (8)
Flatten slightly; FO, leave tail. Lightly stuff tip.
Legs (make 2, Color D)
Rnd 1: 6 sc in MR (6)
Rnds 2–5: sc around (6)
Rnd 6: (sc, inc) around (9)
Rnds 7–8: sc around (9)
Stuff lightly. FO, leave tail.
Toes (optional): On FO end, embroider 3 short gray claws or ch 3, sl st, twice more.
Assembly
- Head to body: Pin head on Rnds 1–8 of body (chest facing forward). Sew with Color A, adding stuffing at neck if needed.
- Beak: Center on face, lower edge about 2 rnds below eyes. Sew.
- Crest: Sew 2–3 flame pieces along top of head, slightly back from forehead, fanned.
- Wings: Pin at sides, upper edge at neck/shoulder (about Rnds 8–12 of body), tips angling back and slightly up. Sew along inner 6–8 sts only so flames flare.
- Tail: Sew to lower back (Rnds 18–22), angled up. Add plumes.
- Legs: Sew under body, slightly forward of center, about 1 in (2.5 cm) apart so bird stands (or sits with legs tucked).
- Weave all ends. Shape flames with fingers.
Finishing
- Do not overstuff wings/tail.
- Safety eyes are a choking hazard for children under 3; embroider eyes instead.
- This is an original fan-style amigurumi inspired by a firebird legendary; not an official licensed product.
Enjoy your Moltres.
Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk
Love this pattern?
Save this pattern to your free PurlJam libraryAccess your pattern anytime
Bookmark this page to access your pattern anytime