Type
Crochet
Difficulty
intermediate
Category
amigurumi
AI Thinking Process
Planning
Verification
Pattern
Royal-Blue Hedgehog Mecha — Intermediate Amigurumi
Skill level: Intermediate
Finished size: About 14 in (35.5 cm) tall including rear spikes and upturned boots (bulky yarn, stuffed firmly).
Gauge: 12 sc and 12 rnds = 4 in (10 cm) in sc, US J/10 (6 mm). Check gauge; change hook to match.
Materials
- Bulky (weight 5) yarn: Royal Blue (MC) ~180 yd (165 m); Black ~80 yd (73 m); Bright Red ~50 yd (46 m); White ~30 yd (27 m); Bright Yellow ~15 yd (14 m); Silver/Metallic Gray ~20 yd (18 m)
- US J/10 (6 mm) hook; US H/8 (5 mm) for spikes/claws if needed
- Polyester stuffing
- Black felt (visor) and Bright Red felt (eyes, ear linings); optional White felt for crown marks
- 5 silver pipe cleaners (or armature wire), 6 in (15 cm) each
- Silver beads or French knots for belt studs
- Yarn needle, stitch markers, scissors, fabric glue (optional), sewing thread
Abbreviations (US)
MR — magic ring; ch — chain; sc — single crochet; hdc — half double crochet; sl st — slip stitch; inc — 2 sc in same st; dec — sc2tog; BLO — back loop only; FLO — front loop only; st(s) — stitch(es); rnd — round; row — row; FO — fasten off.
Work in continuous spirals unless noted. Mark first st of each rnd.
Head (MC, stuffed)
Rnd 1: 6 sc in MR. (6)
Rnd 2: inc around. (12)
Rnd 3: (sc, inc) × 6. (18)
Rnd 4: (2 sc, inc) × 6. (24)
Rnd 5: (3 sc, inc) × 6. (30)
Rnd 6: (4 sc, inc) × 6. (36)
Rnds 7–14: sc around. (36) — 8 rnds
Rnd 15: (4 sc, dec) × 6. (30)
Rnd 16: (3 sc, dec) × 6. (24)
Stuff firmly.
Rnd 17: (2 sc, dec) × 6. (18)
Rnd 18: (sc, dec) × 6. (12)
Rnd 19: dec × 6. (6)
FO, weave closed.
Visor plate: Cut a black felt rectangle ~2.5 × 0.75 in (6.5 × 2 cm). Glue/sew horizontally across the face, slightly below midline, wrapping toward the sides.
Eyes: Two Bright Red felt angular half-moons, points down and slightly inward (scowl). Place on the visor, inner corners ~0.4 in (1 cm) apart. Glue or embroider satin stitch.
Head spines — 5 massive rear-facing cones (MC)
Make 5. Tips stay sharp: only 2–3 increases per rnd.
Rnd 1: 4 sc in MR. (4)
Rnd 2: (sc, inc) × 2. (6)
Rnd 3: sc around. (6)
Rnd 4: (2 sc, inc) × 2. (8)
Rnd 5: sc around. (8)
Rnd 6: (3 sc, inc) × 2. (10)
Rnds 7–8: sc around. (10)
Rnd 9: (4 sc, inc) × 2. (12)
Rnds 10–11: sc around. (12)
Stuff lightly toward the tip only. FO, leave 10 in (25 cm) tail.
Center (front) spike is the longest visually: add Rnds 12–13: sc around. (12) before FO.
Sew all five in a fan on the back/crown of the head, bases touching, tips pointing back and slightly up. Center spike sits highest on the forehead line.
Crown marks (White or Silver)
Work 2–3 flat elongated triangles (rows):
Ch 8.
Row 1: sc in 2nd ch from hook and across. (7)
Row 2: ch 1, turn, dec, 3 sc, dec. (5)
Row 3: ch 1, turn, dec, sc, dec. (3)
Row 4: ch 1, turn, sc3tog. (1) FO.
Sew curved along the front of the center spike.
Ears (MC) — 2 small cones, flattened at base
Rnd 1: 4 sc in MR. (4)
Rnd 2: (sc, inc) × 2. (6)
Rnd 3: (2 sc, inc) × 2. (8)
Rnd 4: sc around. (8) FO, flatten base.
Line inner face with Bright Red felt triangle. Sew to sides of head, just below outer spikes, slightly forward.
Body (MC, stuffed)
Rnd 1: 6 sc in MR. (6)
Rnd 2: inc around. (12)
Rnd 3: (sc, inc) × 6. (18)
Rnd 4: (2 sc, inc) × 6. (24)
Rnd 5: (3 sc, inc) × 6. (30)
Rnds 6–14: sc around. (30) — 9 rnds
Rnd 15: (3 sc, dec) × 6. (24)
Rnds 16–17: sc around. (24)
Rnd 18: (2 sc, dec) × 6. (18)
Stuff firmly. FO, leave tail to sew to head.
Chest core — concentric circles
Yellow center: 6 sc in MR, sl st to join. FO. (6)
Black/Silver border: Join Silver in any st, (sc, inc) × 6, sl st. (12) FO.
Sew to upper chest, slightly overlapping the neck join.
Arms (make 2)
Upper arm / shoulder cup (Black) — half-sphere
Rnd 1: 6 sc in MR. (6)
Rnd 2: inc around. (12)
Rnd 3: (sc, inc) × 6. (18)
Rnd 4: (2 sc, inc) × 6. (24)
Rnds 5–6: sc around. (24)
Rnd 7: sl st around in BLO for a crisp rim. FO. Stuff lightly; sew open edge over the top of the sleeve.
Sleeve cylinder with wizard flare (MC)
Rnd 1: 12 sc in MR (or ch 12, sl st, sc around). (12)
Rnds 2–8: sc around. (12) — 7 rnds
Rnd 9: inc around. (24)
Rnd 10: (sc, inc) × 12. (36)
Rnd 11: (2 sc, inc) × 12. (48)
Rnd 12: (3 sc, inc) × 12. (60)
Rnd 13: sc around. (60)
Rnd 14 (White): sc around. (60) FO.
Sew Black cup over Rnds 1–3 of sleeve. Stuff arm lightly; leave cuff unstuffed so it flares.
Hands (Silver)
Rnd 1: 6 sc in MR. (6)
Rnd 2: inc around. (12)
Rnds 3–4: sc around. (12) FO. Stuff, sew to sleeve opening (narrow end).
Claws: Cut 5 pipe cleaners per hand to 2.5–3 in (6.5–7.5 cm). Wrap tightly with Silver yarn; tuck sharp ends. Sew or glue 5 fingers to the hand front, slightly curved. (Not for children under 3 unless wire is fully enclosed.)
Legs (MC, make 2) then Boots (Bright Red)
Leg:
Rnd 1: 8 sc in MR. (8)
Rnd 2: inc around. (16)
Rnds 3–10: sc around. (16) FO. Stuff.
Curved boot (Bright Red) — short rows for upturned toe
Worked in rows then joined.
Ch 8.
Row 1: sc in 2nd ch and across. (7)
Rows 2–4: ch 1, turn, sc across. (7)
Short-row hook:
Row 5: ch 1, turn, 4 sc, leave 3 unworked.
Row 6: ch 1, turn, 4 sc.
Row 7: ch 1, turn, 4 sc, then sc in the 3 skipped sts. (7)
Rows 8–10: ch 1, turn, sc across. (7)
Fold so short-row edge forms the top of the pointed toe; sl st or sc the long edges together into a tube, stuffing the toe firmly so it hooks upward.
Ankle cuff: Join Red at top opening, sc 16 sts evenly around for 4 rnds.
Rnd 5 (Silver): sc around. FO.
Insert stuffed leg into boot; sew.
Waist belt + loincloth (Black)
Belt: Ch 34 (or to fit waist).
Row 1: sc in 2nd ch and across. (33)
Rows 2–3: ch 1, turn, sc across. FO.
Sew around waist. Add 6–8 silver beads or French knots as studs.
Loincloth: Ch 10.
Rows 1–8: sc 9, ch 1, turn. FO. Sew dangling from center front of belt.
Cape & skirt — three asymmetric panels (MC, White border)
Work flat rows. Make 1 back panel and 2 narrower front flaps.
Back panel:
Ch 16.
Row 1: sc in 2nd ch and across. (15)
Rows 2–20: ch 1, turn, inc in first st, sc to last, inc in last st.
Row 20 = 15 + 38 = 53 (2 inc × 19 rows = 38 ✓).
FO.
Front flaps (make 2):
Ch 8.
Row 1: sc 7.
Rows 2–16: ch 1, turn, inc first and last.
Row 16 = 7 + 30 = 37 (2 inc × 15 = 30 ✓). FO.
Join White and sc evenly around all outer edges of each panel (1 sc per row-end, 3 sc in corners). Sew top edges to the belt/waist: two flaps at front with a center gap over the loincloth; large panel at back. Panels should hang past the feet.
Assembly
- Sew head to body, visor facing forward.
- Attach 5 spines (center spike with crown marks on top-front). Attach ears.
- Sew arms to sides under shoulder cups; cups sit like armor.
- Sew legs to body base, boots pointing slightly out, toes hooked up.
- Add belt, loincloth, cape panels.
- Chest core on upper torso.
- Weave all ends. Shape spikes backward with steam (do not crush stuffing).
Finishing notes
- Safety: omit pipe-cleaner claws or fully encase them for young children; use felt eyes, not hard plastic, for under 3.
- If spikes splay, tack bases together with a few hidden stitches.
- Gauge-critical pieces: head 36-st circumference ≈ 12 in (30 cm) around at gauge 12 sc = 4 in.
Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk
Love this pattern?
Save this pattern to your free PurlJam libraryAccess your pattern anytime
Bookmark this page to access your pattern anytime