← Back to Home

purlJam

Custom Pattern

Type

Crochet

Difficulty

beginner

Category

amigurumi

🎨 Want a Custom Pattern?

Generate your own personalized crochet patterns with PurlJam AI - free and instant!

Create Your Pattern
Generated preview image for Snuggle Bunny Amigurumi
Generated image is inspiration only. Follow the written pattern for stitch counts, measurements, and construction details.
Stitch chart guide image for Snuggle Bunny Amigurumi
Attached stitch chart guide image. Follow the written pattern and chart instructions for placement, stitch counts, and row order.
AI Thinking Process

Planning

1. **Design Strategy**: Beginner amigurumi bunny built from simple spheres, ovals, and tubes (head, body, ears, limbs) in worsted yarn for a soft crib-safe size (~6–7 in / 15–18 cm). Embroidered face only (no safety eyes) for infant safety; minimal parts and basic sc construction. 2. **Construction Plan**: Work all pieces in continuous rounds from magic ring, stuff firmly as you go, then sew together with yarn needle. 3. **Quality Assurance**: - Keep tension tight and use invisible decreases for smooth shape. - Embroider features after assembly; double-secure all seams for crib use. - Stuff evenly so bunny lies softly in a cradle without hard lumps. 4. **Final Calculations**: Gauge ~5 sc = 1 in (2.5 cm) with US E-4/3.5 mm; head ends at 24 sts; body oval ~30 sts max; finished height ~6.5 in (16.5 cm).

Verification

[PRE-FLIGHT CHECKS] 1. **Completeness**: All template sections adapted (materials, abbreviations, gauge, simple-shape pieces, assembly, finishing). Bunny features added per user request. 2. **Consistency**: Stitch counts follow standard sphere/oval/cylinder math; increases/decreases balance (e.g., 6-12-18-24). 3. **Constraints**: Beginner only (sc, inc, dec, magic ring); worsted; US terms; crib-safe (embroidered eyes/nose, no detachable hardware); size suitable to place in a cradle. 4. **Safety**: Math verifiedβ€”no mismatched counts; soft stuffed toy guidance included. 5. **Fix before writing**: Counts locked: head 24-st max, body oval start ch-6 path, ears 8-st tubes, limbs 8-st. No placeholders.

Pattern

Snuggle Bunny Amigurumi

Soft Crib Companion – Beginner Crochet Pattern

A sweet, simple bunny made from basic amigurumi shapes (sphere head, oval body, tube ears and limbs). Soft enough to tuck into a cradle or bassinet. Approx. finished size: 6.5 in / 16.5 cm tall (seated).

Skill Level: Beginner
Techniques: Magic ring, single crochet, increase, invisible decrease, sewing pieces


Materials

  • Worsted weight (4) yarn:
    – Main color (MC): 80–100 yd (73–91 m) soft acrylic or cotton blend (cream, gray, or pastel)
    – Accent (optional): small amount for inner ear or bow
  • US E-4 (3.5 mm) crochet hook (or size needed for tight fabric; go down 1–2 sizes from yarn label)
  • Polyester fiberfill stuffing
  • Yarn needle
  • Stitch marker
  • Black or dark brown embroidery floss/yarn for eyes and nose
  • Scissors
  • Optional: soft blush or pink yarn for cheeks

Note for crib use: Embroider all facial features. Do not use safety eyes, buttons, or beads. Weave in every end securely and double-stitch seams.


Abbreviations (US Terms)

  • ch – chain
  • sc – single crochet
  • inc – increase (2 sc in same stitch)
  • dec – invisible decrease (sc2tog through front loops)
  • st(s) – stitch(es)
  • rnd(s) – round(s)
  • MR – magic ring
  • FO – fasten off
  • [ ] – total stitches at end of round

Work in continuous spirals unless noted. Do not join rounds. Mark the first stitch of each round.


Gauge

5 sc Γ— 5 rnds = 1 in / 2.5 cm in sc (tight amigurumi tension).
Exact gauge is less critical than firm, even stitches with no stuffing show-through.


Pattern Notes

  • Stuff firmly but softly as you goβ€”especially the bodyβ€”so the bunny keeps a cuddly shape in a cradle.
  • Invisible decrease keeps the surface smooth.
  • All pieces start with a magic ring.
  • Leave long tails (12 in / 30 cm) on pieces that will be sewn.

Pieces

Head (Sphere)

With MC:
Rnd 1: 6 sc in MR. [6]
Rnd 2: inc in each st around. [12] (6 inc β†’ 6 + 6 = 12 βœ“)
Rnd 3: (sc, inc) around. [18] (6 inc β†’ 12 + 6 = 18 βœ“)
Rnd 4: (2 sc, inc) around. [24] (6 inc β†’ 18 + 6 = 24 βœ“)
Rnds 5–9: sc around. [24] (5 rounds)
Rnd 10: (2 sc, dec) around. [18] (6 dec β†’ 24 – 6 = 18 βœ“)
Stuff firmly, shaping into a smooth ball.
Rnd 11: (sc, dec) around. [12] (6 dec β†’ 18 – 6 = 12 βœ“)
Rnd 12: dec around. [6] (6 dec β†’ 12 – 6 = 6 βœ“)
FO, leaving a long tail. Thread tail through front loops of remaining 6 sts and pull closed. Weave in end.

Body (Oval)

With MC:
Ch 6.
Rnd 1: sc in 2nd ch from hook, sc in next 3 ch, 3 sc in last ch; rotate to work along opposite side of chain: sc in next 3 ch, 2 sc in last ch (same as starting ch). [12]
Rnd 2: inc, sc in next 3, inc in next 3, sc in next 3, inc in next 2. [18]
Rnd 3: sc, inc, sc in next 3, (sc, inc) Γ— 3, sc in next 3, (sc, inc) Γ— 2. [24]
Rnd 4: 2 sc, inc, sc in next 3, (2 sc, inc) Γ— 3, sc in next 3, (2 sc, inc) Γ— 2. [30]
Rnds 5–10: sc around. [30] (6 rounds)
Rnd 11: (3 sc, dec) around. [24] (6 dec β†’ 30 – 6 = 24 βœ“)
Rnd 12: (2 sc, dec) around. [18] (6 dec β†’ 24 – 6 = 18 βœ“)
Stuff firmly, keeping an elongated egg shape (wider at bottom).
Rnd 13: (sc, dec) around. [12] (6 dec β†’ 18 – 6 = 12 βœ“)
Rnd 14: dec around. [6]
FO, close hole as for head. Leave long tail for sewing to head if desired (or use separate yarn).

Ears (make 2 – long tubes)

With MC:
Rnd 1: 6 sc in MR. [6]
Rnd 2: (sc, inc) around. [9]
Rnds 3–12: sc around. [9] (10 rounds)
Lightly stuff lower β…” only (leave tip soft and foldable).
Rnd 13: (sc, dec) around. [6]
FO, leaving long tail. Flatten open end slightly; do not close fullyβ€”tail will sew ear to head.

Optional inner ear: With accent color, embroider a few vertical satin stitches on the lower half of each ear, or crochet a tiny flat oval (ch 5, sc across both sides) and sew inside.

Arms (make 2 – small cylinders)

With MC:
Rnd 1: 6 sc in MR. [6]
Rnd 2: (sc, inc) around. [9]
Rnds 3–7: sc around. [9]
Lightly stuff.
Rnd 8: (sc, dec) around. [6]
FO, leave long tail, close hole.

Legs (make 2 – slightly longer cylinders)

With MC:
Rnd 1: 6 sc in MR. [6]
Rnd 2: (sc, inc) around. [9]
Rnds 3–9: sc around. [9]
Lightly stuff.
Rnd 10: (sc, dec) around. [6]
FO, leave long tail, close hole.


Assembly

  1. Head to body: Pin head centered on the narrower (top) end of the body. Sew securely with whip stitch all around, adding a tiny bit more stuffing at the neck if needed for a full look. Knot and bury ends inside.
  2. Ears: Flatten the open end of each ear. Pin to the top of the head, slightly toward the back and angled outward (about 0.5 in / 1.3 cm apart). Sew firmly around the base. Fold tips forward gently for a classic bunny look and tack with a tiny stitch if desired.
  3. Arms: Sew to the sides of the body just below the neck seam, angled slightly forward so they rest on the tummy.
  4. Legs: Sew to the lower front of the body so the bunny can sit stably. Attach at a slight outward angle.
  5. Weave in every remaining end securely inside the toy. Tug gently on all limbs and ears to confirm they are crib-safe and will not pull free.

Face (Embroidered – do this last)

Using black/dark brown yarn or floss and yarn needle:

  • Eyes: Two small vertical or slightly angled satin stitches (or French knots) about 3–4 sts apart on the lower half of the head, centered.
  • Nose: A small β€œY” or inverted triangle of satin stitches centered below the eyes.
  • Mouth (optional): One short horizontal stitch under the nose.
  • Cheeks (optional): Tiny pink yarn stitches or a light brush of fabric-safe blush.

Keep stitches small and snug so nothing can snag little fingers.


Finishing

  • Roll the finished bunny gently between your hands to even the stuffing.
  • Check that the toy sits upright and feels soft enough for a cradle.
  • Spot-clean only; air dry.

Customization Ideas (still beginner-friendly)

  • Larger bunny: Add one extra increase round on head and body (to 30/36 sts) and 2–3 extra plain rounds.
  • Floppy ears: Work ears 14–16 rounds instead of 12 and stuff less.
  • Color-block: Work lower half of body or ear tips in a second color.
  • Simple bow: Chain 30, tie around one ear.

Your Snuggle Bunny is ready to keep watch in the cradle. Happy crocheting!

Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk

Access your pattern anytime

Bookmark this page to access your pattern anytime

Generate Another