← Back to Home

purlJam

Custom Pattern

Type

Crochet

Difficulty

intermediate

Category

amigurumi

🎨 Want a Custom Pattern?

Generate your own personalized crochet patterns with PurlJam AI - free and instant!

Create Your Pattern
Generated preview image for Tidecoil the Sea Serpent – Amigurumi
Generated image is inspiration only. Follow the written pattern for stitch counts, measurements, and construction details.
Stitch chart guide image for Tidecoil the Sea Serpent – Amigurumi
Attached stitch chart guide image. Follow the written pattern and chart instructions for placement, stitch counts, and row order.
AI Thinking Process

Planning

1. **Design Strategy**: An original long-bodied serpent dragon in worsted yarn. It is worked in continuous sc spirals with a tight fabric so no stuffing shows. The intermediate details are the continuous head-to-tail shaping, a flat belly panel sewn on, and the spiked fins. 2. **Construction Plan**: The head and body are worked in one piece from the top of the head down to the tail tip, stuffing as you go. The muzzle, belly, fins and tail tuft are made separately and sewn on. 3. **Quality Assurance**: - Stuff progressively, because the narrow tail can't be stuffed later. - Each taper decrease happens on only 3 sts per round, so keep a marker at the round start. - Place the belly panel centered on the underside, along a straight line. 4. **Final Calculations**: Gauge is 9 sc × 10 rnds = 2 in (5 cm). The head is 36 sts, about 8 in (20 cm) around. The body peaks at 24 sts and tapers to 6. The body runs 65 rnds, about 13 in (33 cm), for a total length of about 14 in (36 cm).

Verification

- Head: 6→12→18→24→30→36. Decreases go 36→30→24→18 ✓. - Body: 18→24 (+6). Each taper decrease removes 3 sts: 24→21→18→15→12→9→6 ✓. - Round tally: the head is Rnds 1–16 and the body is Rnds 17–65 = 65 rnds total. 65 ÷ 5 rnds/in = 13 in ✓. - Belly: 40 sts ÷ 4.5 sts/in ≈ 8.9 in, which fits the 24-st body section (Rnds 21–40 ≈ 4 in) plus the taper ✓. - Fins: 3 spikes × 4 sts each ✓. - Not a garment shape, so no measurements table is needed ✓.

Pattern

Tidecoil the Sea Serpent – Amigurumi

Difficulty: Intermediate Finished size: About 14 in (36 cm) long when stretched straight. The head is about 2.5 in (6.5 cm) across.

Materials

  • Worsted weight yarn:
    • Teal (MC): 120 yd (110 m)
    • Cream (CC): 45 yd (41 m)
  • US G-6 / 4.0 mm hook (a size smaller than usual, for a dense fabric)
  • 12 mm safety eyes: 1 pair. For children under 3, embroider the eyes instead.
  • Fiberfill: about 2 oz (55 g)
  • Stitch marker, tapestry needle, pins

Gauge

9 sc × 10 rnds = 2 in (5 cm) in a continuous sc spiral. Gauge isn't critical, but the fabric must be tight enough that stuffing doesn't show through.

Abbreviations (US)

  • MR = magic ring
  • sc = single crochet
  • inc = 2 sc in the same st
  • sc2tog = single crochet 2 together (use the invisible decrease if you like)
  • hdc = half double crochet
  • sl st = slip stitch
  • ch = chain
  • st(s) = stitch(es)
  • rnd = round
  • ( )×n = repeat the sequence n times

Notes

  • Work in continuous spirals and don't join rounds. Move the marker up at the start of each round.
  • The number in brackets at the end of each round is the stitch count.

Head and Body (MC, one piece)

Head

  • Rnd 1: 6 sc in MR. (6)
  • Rnd 2: inc in each st around. (12)
  • Rnd 3: (sc, inc)×6. (18)
  • Rnd 4: (2 sc, inc)×6. (24)
  • Rnd 5: (3 sc, inc)×6. (30)
  • Rnd 6: (4 sc, inc)×6. (36)
  • Rnds 7–13: sc around, 7 rnds. (36)
  • Place the eyes: Insert the safety eyes between Rnds 9 and 10, with 7 sts between them, centered on the round. The stitches between the eyes mark the front of the head. Secure the eye backs.
  • Rnd 14: (4 sc, sc2tog)×6. (30)
  • Rnd 15: (3 sc, sc2tog)×6. (24)
  • Stuff the head firmly.
  • Rnd 16: (2 sc, sc2tog)×6. (18)

Neck and Body

  • Rnds 17–20: sc around, 4 rnds. (18)
  • Rnd 21: (2 sc, inc)×6. (24)
  • Rnds 22–40: sc around, 19 rnds. (24)
  • Stuff the neck and body.

Tail taper (stuff a little more after each section)

  • Rnd 41: (6 sc, sc2tog)×3. (21)
  • Rnds 42–45: sc around. (21)
  • Rnd 46: (5 sc, sc2tog)×3. (18)
  • Rnds 47–50: sc around. (18)
  • Rnd 51: (4 sc, sc2tog)×3. (15)
  • Rnds 52–55: sc around. (15)
  • Rnd 56: (3 sc, sc2tog)×3. (12)
  • Stuff up to this point. Stuff the rest lightly so the tail stays flexible.
  • Rnds 57–60: sc around. (12)
  • Rnd 61: (2 sc, sc2tog)×3. (9)
  • Rnds 62–64: sc around. (9)
  • Rnd 65: (sc, sc2tog)×3. (6)

Fasten off. Weave the tail through the front loops of the last 6 sts, pull tight and weave in the end.

Muzzle (CC)

  • Rnd 1: 6 sc in MR. (6)
  • Rnd 2: inc in each st around. (12)
  • Rnd 3: (sc, inc)×6. (18)
  • Rnds 4–6: sc around. (18)

Fasten off and leave a 12 in (30 cm) tail. Stuff the muzzle lightly.

Belly Panel (CC, worked flat)

  • Foundation: ch 41.
  • Row 1: sc in the 2nd ch from the hook and in each ch across, turn. (40)
  • Rows 2–3: ch 1, sc in each st across, turn. (40)
  • Row 4: ch 1, sc2tog, sc in each of the next 36 sts, sc2tog. (38)

Fasten off and leave a 30 in (76 cm) tail. The panel measures about 8.5 in × 0.8 in (21.5 × 2 cm).

Head Fins (CC, make 2)

  1. Make a MR.
  2. Work one spike: ch 4. Starting in the 2nd ch from the hook, sl st, sc in the next ch, hdc in the next ch, then sl st into the ring.
  3. Work the spike 2 more times, for 3 spikes total. Each spike has 4 sts.
  4. Pull the ring closed.

Fasten off and leave a 10 in (25 cm) tail.

Tail Tuft (CC, make 1)

Work exactly as for the Head Fins. The finished tuft has 3 spikes.

Assembly

  1. Muzzle: Center the muzzle on the front of the head, with its top edge at Rnd 9 and its bottom edge at Rnd 14, just below the eyes. Pin it in place, then whipstitch around the full edge, adding a little stuffing before you close it. Optionally, embroider 2 nostrils in MC on Rnd 4 of the muzzle, 3 sts apart.
  2. Fins: Sew one fin to each side of the head. Attach the base of each fin over Rnds 6–8, 4 sts behind the eye, with the spikes pointing back and up.
  3. Belly: Find the underside. This is the center of the round directly opposite the stitches between the eyes.
    • Pin the wide end (Row 1 edge) of the panel across Rnd 20, then lay the panel straight down the underside to Rnd 60.
    • Whipstitch both long edges in place.
  4. Tail tuft: Sew the tuft's center ring to the closed tail tip at Rnd 65, with the spikes fanning outward.
  5. Shaping: Curve the body into an S-shape. If you like, tack it with 2 hidden stitches at Rnd 30 and Rnd 50 so it holds the coil.
  6. Weave in all ends.

Your Tidecoil sea serpent is complete! 🐉

Disclaimer: This pattern was generated by AI and should be reviewed for accuracy before use. While we strive for quality, AI-generated content may contain errors. Please verify measurements, stitch counts, charts, and instructions before beginning your project. Generated by purlJam.uk

Access your pattern anytime

Bookmark this page to access your pattern anytime

Generate Another